Module:Convert/data
 | This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing. |
This page defines the conversion data used by Module:Convert. All documentation (from Module:Convert/doc) is at that page.
Do not manually add units to this page. First add the unit definitions in Module:Convert/documentation/conversion data. And then update this page by copying the results from Module:Convert/makeunits (those results appear at Module talk:Convert/makeunits).
Any changes should first be tested at Module:Convert/data/sandbox—see Module:Convert/sandbox/testcases.
New units can be manually added at Module:Convert/extra as a temporary measure before being incorporated into this main table.
-- Conversion data used by [[Module:Convert]] which uses mw.loadData() for
-- read-only access to this module so that it is loaded only once per page.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
--
-- These data tables follow:
-- all_units all properties for a unit, including default output
-- default_exceptions exceptions for default output ('kg' and 'g' have different defaults)
-- link_exceptions exceptions for links ('kg' and 'g' have different links)
--
-- These tables are generated by a script which reads the wikitext of a page that
-- documents the required properties of each unit; see [[:en:Module:Convert/doc]].
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local all_units = {
["Gy"] = {
_name1 = "gray",
_symbol = "Gy",
utype = "absorbed radiation dose",
scale = 1,
prefixes = 1,
default = "rad",
link = "Gray (unit)",
},
["rad"] = {
_name1 = "rad",
_symbol = "rad",
utype = "absorbed radiation dose",
scale = 0.01,
prefixes = 1,
default = "Gy",
link = "Rad (unit)",
},
["cm/s2"] = {
name1 = "centimetre per second squared",
name1_us = "centimeter per second squared",
name2 = "centimetres per second squared",
name2_us = "centimeters per second squared",
symbol = "cm/s<sup>2</sup>",
utype = "acceleration",
scale = 0.01,
default = "ft/s2",
link = "Gal (unit)",
},
["ft/s2"] = {
name1 = "foot per second squared",
name2 = "feet per second squared",
symbol = "ft/s<sup>2</sup>",
utype = "acceleration",
scale = 0.3048,
default = "m/s2",
},
["g0"] = {
name1 = "standard gravity",
name2 = "standard gravities",
symbol = "''g''<sub>0</sub>",
utype = "acceleration",
scale = 9.80665,
default = "m/s2",
},
["g-force"] = {
name2 = "''g''",
symbol = "''g''",
utype = "acceleration",
scale = 9.80665,
default = "m/s2",
link = "g-force",
},
["km/hs"] = {
name1 = "kilometre per hour per second",
name1_us = "kilometer per hour per second",
name2 = "kilometres per hour per second",
name2_us = "kilometers per hour per second",
symbol = "km/(h⋅s)",
utype = "acceleration",
scale = 0.27777777777777779,
default = "mph/s",
link = "Acceleration",
},
["km/s2"] = {
name1 = "kilometre per second squared",
name1_us = "kilometer per second squared",
name2 = "kilometres per second squared",
name2_us = "kilometers per second squared",
symbol = "km/s<sup>2</sup>",
utype = "acceleration",
scale = 1000,
default = "mph/s",
link = "Acceleration",
},
["m/s2"] = {
name1 = "metre per second squared",
name1_us = "meter per second squared",
name2 = "metres per second squared",
name2_us = "meters per second squared",
symbol = "m/s<sup>2</sup>",
utype = "acceleration",
scale = 1,
default = "ft/s2",
},
["mph/s"] = {
name1 = "mile per hour per second",
name2 = "miles per hour per second",
symbol = "mph/s",
utype = "acceleration",
scale = 0.44704,
default = "km/hs",
link = "Acceleration",
},
["km/h/s"] = {
target = "km/hs",
},
["standard gravity"] = {
target = "g0",
},
["1000sqft"] = {
name1 = "thousand square feet",
name2 = "thousand square feet",
symbol = "1000 sq ft",
utype = "area",
scale = 92.90304,
default = "m2",
link = "Square foot",
},
["a"] = {
_name1 = "are",
_symbol = "a",
utype = "area",
scale = 100,
prefixes = 1,
default = "sqft",
link = "Hectare#Are",
},
["acre"] = {
symbol = "acre",
usename = 1,
utype = "area",
scale = 4046.8564224,
default = "ha",
subdivs = { ["rood"] = { 4, default = "ha" }, ["sqperch"] = { 160, default = "ha" } },
},
["acre-sing"] = {
target = "acre",
},
["arpent"] = {
symbol = "arpent",
usename = 1,
utype = "area",
scale = 3418.89,
default = "ha",
},
["cda"] = {
name1 = "cuerda",
symbol = "cda",
utype = "area",
scale = 3930.395625,
default = "ha acre",
},
["daa"] = {
name1 = "decare",
symbol = "daa",
utype = "area",
scale = 1000,
default = "km2 sqmi",
},
["dunam"] = {
symbol = "dunam",
usename = 1,
utype = "area",
scale = 1000,
default = "km2 sqmi",
},
["dunum"] = {
symbol = "dunum",
usename = 1,
utype = "area",
scale = 1000,
default = "km2 sqmi",
link = "Dunam",
},
["ha"] = {
name1 = "hectare",
symbol = "ha",
utype = "area",
scale = 10000,
default = "acre",
},
["hectare"] = {
name1 = "hectare",
symbol = "ha",
usename = 1,
utype = "area",
scale = 10000,
default = "acre",
},
["Irish acre"] = {
name1 = "Irish acre",
symbol = "Irish acres",
utype = "area",
scale = 6555.2385024,
default = "ha",
link = "Acre (Irish)",
},
["m2"] = {
_name1 = "square metre",
_name1_us= "square meter",
_symbol = "m<sup>2</sup>",
prefix_position= 8,
utype = "area",
scale = 1,
prefixes = 2,
default = "sqft",
link = "Square metre",
},
["pondemaat"] = {
name1 = "pondemaat",
name2 = "pondemaat",
symbol = "pond",
utype = "area",
scale = 3674.363358816,
default = "m2",
link = ":nl:pondemaat",
},
["pyeong"] = {
name2 = "pyeong",
symbol = "pyeong",
usename = 1,
utype = "area",
scale = 3.3057851239669422,
default = "m2",
},
["rai"] = {
name2 = "rai",
symbol = "rai",
utype = "area",
scale = 1600,
default = "m2",
link = "Rai (unit)",
},
["rood"] = {
symbol = "rood",
usename = 1,
utype = "area",
scale = 1011.7141056,
default = "sqft m2",
subdivs = { ["sqperch"] = { 40, default = "m2" } },
link = "Rood (unit)",
},
["sqfoot"] = {
name1 = "square foot",
name2 = "square foot",
symbol = "sq ft",
utype = "area",
scale = 0.09290304,
default = "m2",
},
["sqft"] = {
name1 = "square foot",
name2 = "square feet",
symbol = "sq ft",
utype = "area",
scale = 0.09290304,
default = "m2",
},
["sqin"] = {
name1 = "square inch",
name2 = "square inches",
symbol = "sq in",
utype = "area",
scale = 0.00064516,
default = "cm2",
},
["sqmi"] = {
name1 = "square mile",
symbol = "sq mi",
utype = "area",
scale = 2589988.110336,
default = "km2",
},
["sqnmi"] = {
name1 = "square nautical mile",
symbol = "sq nmi",
utype = "area",
scale = 3429904,
default = "km2 sqmi",
link = "Nautical mile",
},
["sqperch"] = {
name2 = "perches",
symbol = "perch",
usename = 1,
utype = "area",
scale = 25.29285264,
default = "m2",
link = "Rod (unit)#Area and volume",
},
["sqverst"] = {
symbol = "square verst",
usename = 1,
utype = "area",
scale = 1138062.24,
default = "km2 sqmi",
link = "Verst",
},
["sqyd"] = {
name1 = "square yard",
symbol = "sq yd",
utype = "area",
scale = 0.83612736,
default = "m2",
},
["tsubo"] = {
name2 = "tsubo",
symbol = "tsubo",
usename = 1,
utype = "area",
scale = 3.3057851239669422,
default = "m2",
link = "Japanese units of measurement#Area",
},
["acres"] = {
target = "acre",
},
["are"] = {
target = "a",
},
["decare"] = {
target = "daa",
},
["foot2"] = {
target = "sqfoot",
},
["ft2"] = {
target = "sqft",
},
["in2"] = {
target = "sqin",
symbol = "in<sup>2</sup>",
},
["km²"] = {
target = "km2",
},
["mi2"] = {
target = "sqmi",
},
["million acre"] = {
target = "e6acre",
},
["million acres"] = {
target = "e6acre",
},
["million hectares"] = {
target = "e6ha",
},
["m²"] = {
target = "m2",
},
["nmi2"] = {
target = "sqnmi",
},
["pond"] = {
target = "pondemaat",
},
["sq arp"] = {
target = "arpent",
},
["sqkm"] = {
target = "km2",
},
["sqm"] = {
target = "m2",
},
["square verst"] = {
target = "sqverst",
},
["verst2"] = {
target = "sqverst",
},
["yd2"] = {
target = "sqyd",
},
["m2/ha"] = {
name1 = "square metre per hectare",
name1_us = "square meter per hectare",
name2 = "square metres per hectare",
name2_us = "square meters per hectare",
symbol = "m<sup>2</sup>/ha",
utype = "area per unit area",
scale = 0.0001,
default = "sqft/acre",
link = "Basal area",
},
["sqft/acre"] = {
name1 = "square foot per acre",
name2 = "square feet per acre",
symbol = "sq ft/acre",
utype = "area per unit area",
scale = 2.295684113865932e-5,
default = "m2/ha",
link = "Basal area",
},
["cent"] = {
name1 = "cent",
symbol = "¢",
utype = "cent",
scale = 1,
default = "cent",
link = "Cent (currency)",
},
["¢"] = {
target = "cent",
},
["A.h"] = {
name1 = "ampere hour",
symbol = "A⋅h",
utype = "charge",
scale = 3600,
default = "coulomb",
},
["coulomb"] = {
_name1 = "coulomb",
_symbol = "C",
utype = "charge",
scale = 1,
prefixes = 1,
default = "e",
link = "Coulomb",
},
["e"] = {
name1 = "elementary charge",
symbol = "''e''",
utype = "charge",
scale = 1.602176487e-19,
default = "coulomb",
},
["g-mol"] = {
name1 = "gram-mole",
symbol = "g‑mol",
utype = "chemical amount",
scale = 1,
default = "lbmol",
link = "Mole (unit)",
},
["gmol"] = {
name1 = "gram-mole",
symbol = "gmol",
utype = "chemical amount",
scale = 1,
default = "lbmol",
link = "Mole (unit)",
},
["kmol"] = {
name1 = "kilomole",
symbol = "kmol",
utype = "chemical amount",
scale = 1000,
default = "lbmol",
link = "Mole (unit)",
},
["lb-mol"] = {
name1 = "pound-mole",
symbol = "lb‑mol",
utype = "chemical amount",
scale = 453.59237,
default = "mol",
},
["lbmol"] = {
name1 = "pound-mole",
symbol = "lbmol",
utype = "chemical amount",
scale = 453.59237,
default = "mol",
},
["mol"] = {
name1 = "mole",
symbol = "mol",
utype = "chemical amount",
scale = 1,
default = "lbmol",
link = "Mole (unit)",
},
["kgCO2/L"] = {
name1 = "kilogram per litre",
name1_us = "kilogram per liter",
name2 = "kilograms per litre",
name2_us = "kilograms per liter",
symbol = "kg(CO<sub>2</sub>)/L",
utype = "co2 per unit volume",
scale = 1000,
default = "lbCO2/USgal",
link = "Exhaust gas",
},
["lbCO2/USgal"] = {
name1 = "pound per US gallon",
name2 = "pounds per US gallon",
symbol = "lbCO2/US gal",
utype = "co2 per unit volume",
scale = 119.82642731689663,
default = "kgCO2/L",
link = "Exhaust gas",
},
["oz/lb"] = {
per = { "oz", "lb" },
utype = "concentration",
default = "mg/kg",
},
["mg/kg"] = {
per = { "mg", "kg" },
utype = "concentration",
default = "oz/lb",
},
["g/dm3"] = {
name1 = "gram per cubic decimetre",
name1_us = "gram per cubic decimeter",
name2 = "grams per cubic decimetre",
name2_us = "grams per cubic decimeter",
symbol = "g/dm<sup>3</sup>",
utype = "density",
scale = 1,
default = "kg/m3",
link = "Density",
},
["g/L"] = {
name1 = "gram per litre",
name1_us = "gram per liter",
name2 = "grams per litre",
name2_us = "grams per liter",
symbol = "g/L",
utype = "density",
scale = 1,
default = "lb/cuin",
link = "Density",
},
["g/mL"] = {
name1 = "gram per millilitre",
name1_us = "gram per milliliter",
name2 = "grams per millilitre",
name2_us = "grams per milliliter",
symbol = "g/mL",
utype = "density",
scale = 1000,
default = "lb/cuin",
link = "Density",
},
["g/ml"] = {
name1 = "gram per millilitre",
name1_us = "gram per milliliter",
name2 = "grams per millilitre",
name2_us = "grams per milliliter",
symbol = "g/ml",
utype = "density",
scale = 1000,
default = "lb/cuin",
link = "Density",
},
["kg/dm3"] = {
name1 = "kilogram per cubic decimetre",
name1_us = "kilogram per cubic decimeter",
name2 = "kilograms per cubic decimetre",
name2_us = "kilograms per cubic decimeter",
symbol = "kg/dm<sup>3</sup>",
utype = "density",
scale = 1000,
default = "lb/cuft",
link = "Density",
},
["kg/L"] = {
name1 = "kilogram per litre",
name1_us = "kilogram per liter",
name2 = "kilograms per litre",
name2_us = "kilograms per liter",
symbol = "kg/L",
utype = "density",
scale = 1000,
default = "lb/USgal",
link = "Density",
},
["kg/l"] = {
name1 = "kilogram per litre",
name1_us = "kilogram per liter",
name2 = "kilograms per litre",
name2_us = "kilograms per liter",
symbol = "kg/l",
utype = "density",
scale = 1000,
default = "lb/USgal",
link = "Density",
},
["kg/m3"] = {
name1 = "kilogram per cubic metre",
name1_us = "kilogram per cubic meter",
name2 = "kilograms per cubic metre",
name2_us = "kilograms per cubic meter",
symbol = "kg/m<sup>3</sup>",
utype = "density",
scale = 1,
default = "lb/cuyd",
link = "Density",
},
["lb/cuft"] = {
name1 = "pound per cubic foot",
name2 = "pounds per cubic foot",
symbol = "lb/cu ft",
utype = "density",
scale = 16.018463373960142,
default = "g/cm3",
link = "Density",
},
["lb/cuin"] = {
name1 = "pound per cubic inch",
name2 = "pounds per cubic inch",
symbol = "lb/cu in",
utype = "density",
scale = 27679.904710203122,
default = "g/cm3",
link = "Density",
},
["lb/cuyd"] = {
name1 = "pound per cubic yard",
name2 = "pounds per cubic yard",
symbol = "lb/cu yd",
utype = "density",
scale = 0.5932764212577829,
default = "kg/m3",
link = "Density",
},
["lb/impgal"] = {
name1 = "pound per imperial gallon",
name2 = "pounds per imperial gallon",
symbol = "lb/imp gal",
utype = "density",
scale = 99.776372663101697,
default = "kg/L",
link = "Density",
},
["lb/in3"] = {
name1 = "pound per cubic inch",
name2 = "pounds per cubic inch",
symbol = "lb/cu in",
utype = "density",
scale = 27679.904710203122,
default = "g/cm3",
link = "Density",
},
["lb/U.S.gal"] = {
name1 = "pound per U.S. gallon",
name2 = "pounds per U.S. gallon",
symbol = "lb/U.S. gal",
utype = "density",
scale = 119.82642731689663,
default = "kg/L",
link = "Density",
},
["lb/USbu"] = {
name1 = "pound per US bushel",
name2 = "pounds per US bushel",
symbol = "lb/US bu",
utype = "density",
scale = 12.871859780974471,
default = "kg/m3",
link = "Bushel",
},
["lb/USgal"] = {
name1 = "pound per US gallon",
name2 = "pounds per US gallon",
symbol = "lb/US gal",
utype = "density",
scale = 119.82642731689663,
default = "kg/L",
link = "Density",
},
["lbm/cuin"] = {
name1 = "pound mass per cubic inch",
name2 = "pounds mass per cubic inch",
symbol = "lbm/cu in",
utype = "density",
scale = 27679.904710203122,
default = "g/cm3",
link = "Density",
},
["mg/L"] = {
name1 = "milligram per litre",
name1_us = "milligram per liter",
name2 = "milligrams per litre",
name2_us = "milligrams per liter",
symbol = "mg/L",
utype = "density",
scale = 0.001,
default = "lb/cuin",
link = "Density",
},
["oz/cuin"] = {
name1 = "ounce per cubic inch",
name2 = "ounces per cubic inch",
symbol = "oz/cu in",
utype = "density",
scale = 1729.9940443876951,
default = "g/cm3",
link = "Density",
},
["g/cm3"] = {
per = { "g", "cm3" },
utype = "density",
default = "lb/cuin",
},
["g/m3"] = {
per = { "g", "m3" },
utype = "density",
default = "lb/cuyd",
link = "Density",
},
["Mg/m3"] = {
per = { "Mg", "m3" },
utype = "density",
default = "lb/cuft",
},
["mg/l"] = {
per = { "mg", "l" },
utype = "density",
default = "oz/cuin",
},
["μg/dL"] = {
per = { "μg", "dL" },
utype = "density",
default = "lb/cuin",
},
["μg/l"] = {
per = { "μg", "l" },
utype = "density",
default = "oz/cuin",
},
["lb/ft3"] = {
target = "lb/cuft",
},
["lb/yd3"] = {
target = "lb/cuyd",
},
["lbm/in3"] = {
target = "lbm/cuin",
},
["mcg/dL"] = {
target = "μg/dL",
},
["oz/in3"] = {
target = "oz/cuin",
},
["ug/dL"] = {
target = "μg/dL",
},
["ug/l"] = {
target = "μg/l",
},
["B.O.T.U."] = {
name1 = "Board of Trade Unit",
symbol = "B.O.T.U.",
utype = "energy",
scale = 3600000,
default = "MJ",
link = "Kilowatt-hour",
},
["bboe"] = {
name1 = "barrel of oil equivalent",
name2 = "barrels of oil equivalent",
symbol = "bboe",
utype = "energy",
scale = 6117863200,
default = "GJ",
},
["BOE"] = {
name1 = "barrel of oil equivalent",
name2 = "barrels of oil equivalent",
symbol = "BOE",
utype = "energy",
scale = 6117863200,
default = "GJ",
},
["BTU"] = {
name1 = "British thermal unit",
symbol = "BTU",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
},
["Btu"] = {
name1 = "British thermal unit",
symbol = "Btu",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
},
["BTU-39F"] = {
name1 = "British thermal unit (39°F)",
name2 = "British thermal units (39°F)",
symbol = "BTU<sub>39°F</sub>",
utype = "energy",
scale = 1059.67,
default = "kJ",
link = "British thermal unit",
},
["Btu-39F"] = {
name1 = "British thermal unit (39°F)",
name2 = "British thermal units (39°F)",
symbol = "Btu<sub>39°F</sub>",
utype = "energy",
scale = 1059.67,
default = "kJ",
link = "British thermal unit",
},
["BTU-59F"] = {
name1 = "British thermal unit (59°F)",
name2 = "British thermal units (59°F)",
symbol = "BTU<sub>59°F</sub>",
utype = "energy",
scale = 1054.804,
default = "kJ",
link = "British thermal unit",
},
["Btu-59F"] = {
name1 = "British thermal unit (59°F)",
name2 = "British thermal units (59°F)",
symbol = "Btu<sub>59°F</sub>",
utype = "energy",
scale = 1054.804,
default = "kJ",
link = "British thermal unit",
},
["BTU-60F"] = {
name1 = "British thermal unit (60°F)",
name2 = "British thermal units (60°F)",
symbol = "BTU<sub>60°F</sub>",
utype = "energy",
scale = 1054.68,
default = "kJ",
link = "British thermal unit",
},
["Btu-60F"] = {
name1 = "British thermal unit (60°F)",
name2 = "British thermal units (60°F)",
symbol = "Btu<sub>60°F</sub>",
utype = "energy",
scale = 1054.68,
default = "kJ",
link = "British thermal unit",
},
["BTU-63F"] = {
name1 = "British thermal unit (63°F)",
name2 = "British thermal units (63°F)",
symbol = "BTU<sub>63°F</sub>",
utype = "energy",
scale = 1054.6,
default = "kJ",
link = "British thermal unit",
},
["Btu-63F"] = {
name1 = "British thermal unit (63°F)",
name2 = "British thermal units (63°F)",
symbol = "Btu<sub>63°F</sub>",
utype = "energy",
scale = 1054.6,
default = "kJ",
link = "British thermal unit",
},
["BTU-ISO"] = {
name1 = "British thermal unit (ISO)",
name2 = "British thermal units (ISO)",
symbol = "BTU<sub>ISO</sub>",
utype = "energy",
scale = 1055.056,
default = "kJ",
link = "British thermal unit",
},
["Btu-ISO"] = {
target = "BTU-ISO",
},
["BTU-IT"] = {
name1 = "British thermal unit (IT)",
name2 = "British thermal units (IT)",
symbol = "BTU<sub>IT</sub>",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
link = "British thermal unit",
},
["Btu-IT"] = {
name1 = "British thermal unit (IT)",
name2 = "British thermal units (IT)",
symbol = "Btu<sub>IT</sub>",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
link = "British thermal unit",
},
["BTU-mean"] = {
name1 = "British thermal unit (mean)",
name2 = "British thermal units (mean)",
symbol = "BTU<sub>mean</sub>",
utype = "energy",
scale = 1055.87,
default = "kJ",
link = "British thermal unit",
},
["Btu-mean"] = {
name1 = "British thermal unit (mean)",
name2 = "British thermal units (mean)",
symbol = "Btu<sub>mean</sub>",
utype = "energy",
scale = 1055.87,
default = "kJ",
link = "British thermal unit",
},
["BTU-th"] = {
name1 = "British thermal unit (thermochemical)",
name2 = "British thermal units (thermochemical)",
symbol = "BTU<sub>th</sub>",
utype = "energy",
scale = 1054.35026444,
default = "kJ",
link = "British thermal unit",
},
["Btu-th"] = {
name1 = "British thermal unit (thermochemical)",
name2 = "British thermal units (thermochemical)",
symbol = "Btu<sub>th</sub>",
utype = "energy",
scale = 1054.35026444,
default = "kJ",
link = "British thermal unit",
},
["Cal"] = {
name1 = "calorie",
symbol = "Cal",
utype = "energy",
scale = 4184,
default = "kJ",
},
["cal"] = {
name1 = "calorie",
symbol = "cal",
utype = "energy",
scale = 4.184,
default = "J",
},
["Cal-15"] = {
name1 = "Calorie (15°C)",
name2 = "Calories (15°C)",
symbol = "Cal<sub>15</sub>",
utype = "energy",
scale = 4185.8,
default = "kJ",
link = "Calorie",
},
["cal-15"] = {
name1 = "calorie (15°C)",
name2 = "calories (15°C)",
symbol = "cal<sub>15</sub>",
utype = "energy",
scale = 4.1858,
default = "J",
link = "Calorie",
},
["Cal-IT"] = {
name1 = "Calorie (International Steam Table)",
name2 = "Calories (International Steam Table)",
symbol = "Cal<sub>IT</sub>",
utype = "energy",
scale = 4186.8,
default = "kJ",
link = "Calorie",
},
["cal-IT"] = {
name1 = "calorie (International Steam Table)",
name2 = "calories (International Steam Table)",
symbol = "cal<sub>IT</sub>",
utype = "energy",
scale = 4.1868,
default = "J",
link = "Calorie",
},
["Cal-th"] = {
name1 = "Calorie (thermochemical)",
name2 = "Calories (thermochemical)",
symbol = "Cal<sub>th</sub>",
utype = "energy",
scale = 4184,
default = "kJ",
link = "Calorie",
},
["cal-th"] = {
name1 = "calorie (thermochemical)",
name2 = "calories (thermochemical)",
symbol = "cal<sub>th</sub>",
utype = "energy",
scale = 4.184,
default = "J",
link = "Calorie",
},
["CHU-IT"] = {
name1 = "Celsius heat unit (International Table)",
name2 = "Celsius heat units (International Table)",
symbol = "CHU<sub>IT</sub>",
utype = "energy",
scale = 1899.100534716,
default = "kJ",
link = "Conversion of units#Energy",
},
["cufootnaturalgas"] = {
name1 = "cubic foot of natural gas",
name2 = "cubic foot of natural gas",
symbol = "cuftnaturalgas",
usename = 1,
utype = "energy",
scale = 1055055.85262,
default = "MJ",
link = "Conversion of units#Energy",
},
["cuftnaturalgas"] = {
name1 = "cubic foot of natural gas",
name2 = "cubic feet of natural gas",
symbol = "cuftnaturalgas",
usename = 1,
utype = "energy",
scale = 1055055.85262,
default = "MJ",
link = "Conversion of units#Energy",
},
["Eh"] = {
name1 = "Hartree",
symbol = "''E''<sub>h</sub>",
utype = "energy",
scale = 4.35974417e-18,
default = "eV",
},
["erg"] = {
symbol = "erg",
utype = "energy",
scale = 0.0000001,
default = "μJ",
},
["eV"] = {
name1 = "electronvolt",
symbol = "eV",
utype = "energy",
scale = 1.602176487e-19,
default = "aJ",
},
["feV"] = {
name1 = "femtoelectronvolt",
symbol = "feV",
utype = "energy",
scale = 1.602176487e-34,
default = "yJ",
link = "Electronvolt",
},
["foe"] = {
symbol = "foe",
utype = "energy",
scale = 1e44,
default = "YJ",
link = "Foe (unit)",
},
["ftlb"] = {
name1 = "foot-pound",
symbol = "ft⋅lb",
utype = "energy",
alttype = "torque",
scale = 1.3558179483314004,
default = "J",
link = "Foot-pound (energy)",
},
["ftlb-f"] = {
name1 = "foot-pound force",
name2 = "foot-pounds force",
symbol = "ft⋅lb<sub>f</sub>",
utype = "energy",
alttype = "torque",
scale = 1.3558179483314004,
default = "J",
link = "Foot-pound (energy)",
},
["ftlbf"] = {
name1 = "foot-pound force",
name2 = "foot-pounds force",
symbol = "ft⋅lbf",
utype = "energy",
alttype = "torque",
scale = 1.3558179483314004,
default = "J",
link = "Foot-pound (energy)",
},
["ftpdl"] = {
name1 = "foot-poundal",
symbol = "ft⋅pdl",
utype = "energy",
scale = 0.0421401100938048,
default = "J",
},
["GeV"] = {
name1 = "gigaelectronvolt",
symbol = "GeV",
utype = "energy",
scale = 1.602176487e-10,
default = "nJ",
link = "Electronvolt",
},
["gTNT"] = {
name2 = "grams of TNT",
symbol = "gram of TNT",
usename = 1,
utype = "energy",
scale = 4184,
default = "kJ",
link = "TNT equivalent",
},
["Gtoe"] = {
name1 = "gigatonne of oil equivalent",
name2 = "gigatonnes of oil equivalent",
symbol = "Gtoe",
utype = "energy",
scale = 4.1868e19,
default = "EJ",
link = "Tonne of oil equivalent",
},
["GtonTNT"] = {
name2 = "gigatons of TNT",
symbol = "gigaton of TNT",
usename = 1,
utype = "energy",
scale = 4.184e18,
default = "EJ",
link = "TNT equivalent",
},
["GtTNT"] = {
name2 = "gigatonnes of TNT",
symbol = "gigatonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e18,
default = "EJ",
link = "TNT equivalent",
},
["GW.h"] = {
name1 = "gigawatt-hour",
symbol = "GW⋅h",
utype = "energy",
scale = 3.6e12,
default = "TJ",
link = "Kilowatt-hour",
},
["GWh"] = {
name1 = "gigawatt-hour",
symbol = "GWh",
utype = "energy",
scale = 3.6e12,
default = "TJ",
link = "Kilowatt-hour",
},
["hph"] = {
name1 = "horsepower-hour",
symbol = "hp⋅h",
utype = "energy",
scale = 2684519.537696172792,
default = "kWh",
link = "Horsepower",
},
["inlb"] = {
name1 = "inch-pound",
symbol = "in⋅lb",
utype = "energy",
alttype = "torque",
scale = 0.1129848290276167,
default = "mJ",
link = "Foot-pound (energy)",
},
["inlb-f"] = {
name1 = "inch-pound force",
name2 = "inch-pounds force",
symbol = "in⋅lb<sub>f</sub>",
utype = "energy",
alttype = "torque",
scale = 0.1129848290276167,
default = "mJ",
link = "Foot-pound (energy)",
},
["inlbf"] = {
name1 = "inch-pound force",
name2 = "inch-pounds force",
symbol = "in⋅lbf",
utype = "energy",
alttype = "torque",
scale = 0.1129848290276167,
default = "mJ",
link = "Foot-pound (energy)",
},
["inoz-f"] = {
name1 = "inch-ounce force",
name2 = "inch-ounces force",
symbol = "in⋅oz<sub>f</sub>",
utype = "energy",
alttype = "torque",
scale = 0.00706155181422604375,
default = "mJ",
link = "Foot-pound (energy)",
},
["inozf"] = {
name1 = "inch-ounce force",
name2 = "inch-ounces force",
symbol = "in⋅ozf",
utype = "energy",
alttype = "torque",
scale = 0.00706155181422604375,
default = "mJ",
link = "Foot-pound (energy)",
},
["J"] = {
_name1 = "joule",
_symbol = "J",
utype = "energy",
scale = 1,
prefixes = 1,
default = "cal",
link = "Joule",
},
["kBOE"] = {
name1 = "kilo barrel of oil equivalent",
name2 = "kilo barrels of oil equivalent",
symbol = "kBOE",
utype = "energy",
scale = 6.1178632e12,
default = "TJ",
link = "Barrel of oil equivalent",
},
["kcal"] = {
name1 = "kilocalorie",
symbol = "kcal",
utype = "energy",
scale = 4184,
default = "kJ",
link = "Calorie",
},
["kcal-15"] = {
name1 = "kilocalorie (15°C)",
name2 = "kilocalories (15°C)",
symbol = "kcal<sub>15</sub>",
utype = "energy",
scale = 4185.8,
default = "kJ",
link = "Calorie",
},
["kcal-IT"] = {
name1 = "kilocalorie (International Steam Table)",
name2 = "kilocalories (International Steam Table)",
symbol = "kcal<sub>IT</sub>",
utype = "energy",
scale = 4186.8,
default = "kJ",
link = "Calorie",
},
["kcal-th"] = {
name1 = "kilocalorie (thermochemical)",
name2 = "kilocalories (thermochemical)",
symbol = "kcal<sub>th</sub>",
utype = "energy",
scale = 4184,
default = "kJ",
link = "Calorie",
},
["kerg"] = {
name1 = "kiloerg",
symbol = "kerg",
utype = "energy",
scale = 0.0001,
default = "mJ",
link = "Erg",
},
["keV"] = {
name1 = "kiloelectronvolt",
symbol = "keV",
utype = "energy",
scale = 1.602176487e-16,
default = "fJ",
link = "Electronvolt",
},
["kgTNT"] = {
name2 = "kilograms of TNT",
symbol = "kilogram of TNT",
usename = 1,
utype = "energy",
scale = 4184000,
default = "MJ",
link = "TNT equivalent",
},
["kt(TNT)"] = {
name1 = "kilotonne",
name1_us = "kiloton",
symbol = "kt",
utype = "energy",
scale = 4.184e12,
default = "TJ",
link = "TNT equivalent",
},
["ktoe"] = {
name1 = "kilotonne of oil equivalent",
name2 = "kilotonnes of oil equivalent",
symbol = "ktoe",
utype = "energy",
scale = 4.1868e13,
default = "TJ",
link = "Tonne of oil equivalent",
},
["ktonTNT"] = {
name1 = "kiloton of TNT",
name2 = "kilotons of TNT",
symbol = "kt",
utype = "energy",
scale = 4.184e12,
default = "TJ",
link = "TNT equivalent",
},
["ktTNT"] = {
name2 = "kilotonnes of TNT",
symbol = "kilotonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e12,
default = "TJ",
link = "TNT equivalent",
},
["kW.h"] = {
name1 = "kilowatt-hour",
symbol = "kW⋅h",
utype = "energy",
scale = 3600000,
default = "MJ",
},
["kWh"] = {
name1 = "kilowatt-hour",
symbol = "kWh",
utype = "energy",
scale = 3600000,
default = "MJ",
},
["Mcal"] = {
name1 = "megacalorie",
symbol = "Mcal",
utype = "energy",
scale = 4184000,
default = "MJ",
link = "Calorie",
},
["mcal"] = {
name1 = "millicalorie",
symbol = "mcal",
utype = "energy",
scale = 0.004184,
default = "mJ",
link = "Calorie",
},
["Mcal-15"] = {
name1 = "megacalorie (15°C)",
name2 = "megacalories (15°C)",
symbol = "Mcal<sub>15</sub>",
utype = "energy",
scale = 4185800,
default = "MJ",
link = "Calorie",
},
["mcal-15"] = {
name1 = "millicalorie (15°C)",
name2 = "millicalories (15°C)",
symbol = "mcal<sub>15</sub>",
utype = "energy",
scale = 0.0041858,
default = "mJ",
link = "Calorie",
},
["Mcal-IT"] = {
name1 = "megacalorie (International Steam Table)",
name2 = "megacalories (International Steam Table)",
symbol = "Mcal<sub>IT</sub>",
utype = "energy",
scale = 4186800,
default = "MJ",
link = "Calorie",
},
["mcal-IT"] = {
name1 = "millicalorie (International Steam Table)",
name2 = "millicalories (International Steam Table)",
symbol = "mcal<sub>IT</sub>",
utype = "energy",
scale = 0.0041868,
default = "mJ",
link = "Calorie",
},
["Mcal-th"] = {
name1 = "megacalorie (thermochemical)",
name2 = "megacalories (thermochemical)",
symbol = "Mcal<sub>th</sub>",
utype = "energy",
scale = 4184000,
default = "MJ",
link = "Calorie",
},
["mcal-th"] = {
name1 = "millicalorie (thermochemical)",
name2 = "millicalories (thermochemical)",
symbol = "mcal<sub>th</sub>",
utype = "energy",
scale = 0.004184,
default = "mJ",
link = "Calorie",
},
["Merg"] = {
name1 = "megaerg",
symbol = "Merg",
utype = "energy",
scale = 0.1,
default = "J",
link = "Erg",
},
["merg"] = {
name1 = "millierg",
symbol = "merg",
utype = "energy",
scale = 0.0000000001,
default = "μJ",
link = "Erg",
},
["MeV"] = {
name1 = "megaelectronvolt",
symbol = "MeV",
utype = "energy",
scale = 1.602176487e-13,
default = "pJ",
link = "Electronvolt",
},
["meV"] = {
name1 = "millielectronvolt",
symbol = "meV",
utype = "energy",
scale = 1.602176487e-22,
default = "zJ",
link = "Electronvolt",
},
["MMBtu"] = {
name1 = "million British thermal units",
name2 = "million British thermal units",
symbol = "MMBtu",
utype = "energy",
scale = 1055055852.62,
default = "GJ",
link = "British thermal unit",
},
["Mt(TNT)"] = {
name1 = "megatonne",
name1_us = "megaton",
symbol = "Mt",
utype = "energy",
scale = 4.184e15,
default = "PJ",
link = "TNT equivalent",
},
["Mtoe"] = {
name1 = "megatonne of oil equivalent",
name2 = "megatonnes of oil equivalent",
symbol = "Mtoe",
utype = "energy",
scale = 4.1868e16,
default = "PJ",
link = "Tonne of oil equivalent",
},
["MtonTNT"] = {
name1 = "megaton of TNT",
name2 = "megatons of TNT",
symbol = "Mt",
utype = "energy",
scale = 4.184e15,
default = "PJ",
link = "TNT equivalent",
},
["mtonTNT"] = {
name2 = "millitons of TNT",
symbol = "milliton of TNT",
usename = 1,
utype = "energy",
scale = 4184000,
default = "MJ",
link = "TNT equivalent",
},
["MtTNT"] = {
name2 = "megatonnes of TNT",
symbol = "megatonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e15,
default = "PJ",
link = "TNT equivalent",
},
["mtTNT"] = {
name2 = "millitonnes of TNT",
symbol = "millitonne of TNT",
usename = 1,
utype = "energy",
scale = 4184000,
default = "MJ",
link = "TNT equivalent",
},
["MW.h"] = {
name1 = "megawatt-hour",
symbol = "MW⋅h",
utype = "energy",
scale = 3600000000,
default = "GJ",
link = "Kilowatt-hour",
},
["mW.h"] = {
name1 = "milliwatt-hour",
symbol = "mW⋅h",
utype = "energy",
scale = 3.6,
default = "J",
link = "Kilowatt-hour",
},
["MWh"] = {
name1 = "megawatt-hour",
symbol = "MWh",
utype = "energy",
scale = 3600000000,
default = "GJ",
link = "Kilowatt-hour",
},
["mWh"] = {
name1 = "milliwatt-hour",
symbol = "mWh",
utype = "energy",
scale = 3.6,
default = "J",
link = "Kilowatt-hour",
},
["neV"] = {
name1 = "nanoelectronvolt",
symbol = "neV",
utype = "energy",
scale = 1.602176487e-28,
default = "yJ",
link = "Electronvolt",
},
["PeV"] = {
name1 = "petaelectronvolt",
symbol = "PeV",
utype = "energy",
scale = 0.0001602176487,
default = "mJ",
link = "Electronvolt",
},
["peV"] = {
name1 = "picoelectronvolt",
symbol = "peV",
utype = "energy",
scale = 1.602176487e-31,
default = "yJ",
link = "Electronvolt",
},
["PSh"] = {
name1 = "Pferdestärkenstunde",
symbol = "PSh",
utype = "energy",
scale = 2647795.5,
default = "kWh",
},
["quad"] = {
name1 = "quadrillion British thermal units",
name2 = "quadrillion British thermal units",
symbol = "quad",
utype = "energy",
scale = 1.054804e18,
default = "EJ",
link = "Quad (unit)",
},
["Ry"] = {
name1 = "rydberg",
symbol = "Ry",
utype = "energy",
scale = 2.1798741e-18,
default = "eV",
link = "Rydberg constant",
},
["scf"] = {
name1 = "standard cubic foot",
name2 = "standard cubic feet",
symbol = "scf",
utype = "energy",
scale = 2869.2044809344,
default = "kJ",
},
["scfoot"] = {
name1 = "standard cubic foot",
name2 = "standard cubic foot",
symbol = "scf",
utype = "energy",
scale = 2869.2044809344,
default = "kJ",
},
["t(TNT)"] = {
name1 = "tonne",
name1_us = "ton",
symbol = "t",
utype = "energy",
scale = 4184000000,
default = "GJ",
link = "TNT equivalent",
},
["TeV"] = {
name1 = "teraelectronvolt",
symbol = "TeV",
utype = "energy",
scale = 1.602176487e-7,
default = "μJ",
link = "Electronvolt",
},
["th"] = {
name1 = "thermie",
symbol = "th",
utype = "energy",
scale = 4186800,
default = "MJ",
link = "Conversion of units#Energy",
},
["thm-EC"] = {
name1 = "therm (EC)",
name2 = "therms (EC)",
symbol = "thm (EC)",
utype = "energy",
scale = 105506000,
default = "MJ",
link = "Therm",
},
["thm-UK"] = {
name1 = "therm (UK)",
name2 = "therms (UK)",
symbol = "thm (UK)",
utype = "energy",
scale = 105505585.257348,
default = "MJ",
link = "Therm",
},
["thm-US"] = {
name1 = "therm (US)",
name1_us = "therm (U.S.)",
name2 = "therms (US)",
name2_us = "therms (U.S.)",
symbol = "thm (US)",
sym_us = "thm (U.S.)",
utype = "energy",
scale = 105480400,
default = "MJ",
link = "Therm",
},
["toe"] = {
name1 = "tonne of oil equivalent",
name2 = "tonnes of oil equivalent",
symbol = "toe",
utype = "energy",
scale = 41868000000,
default = "GJ",
},
["tonTNT"] = {
name2 = "tons of TNT",
symbol = "ton of TNT",
usename = 1,
utype = "energy",
scale = 4184000000,
default = "GJ",
link = "TNT equivalent",
},
["tTNT"] = {
name2 = "tonnes of TNT",
symbol = "tonne of TNT",
usename = 1,
utype = "energy",
scale = 4184000000,
default = "GJ",
link = "TNT equivalent",
},
["TtonTNT"] = {
name2 = "teratons of TNT",
symbol = "teraton of TNT",
usename = 1,
utype = "energy",
scale = 4.184e21,
default = "ZJ",
link = "TNT equivalent",
},
["TtTNT"] = {
name2 = "teratonnes of TNT",
symbol = "teratonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e21,
default = "ZJ",
link = "TNT equivalent",
},
["TW.h"] = {
name1 = "terawatt-hour",
symbol = "TW⋅h",
utype = "energy",
scale = 3.6e15,
default = "PJ",
link = "Kilowatt-hour",
},
["TWh"] = {
name1 = "terawatt-hour",
symbol = "TWh",
utype = "energy",
scale = 3.6e15,
default = "PJ",
link = "Kilowatt-hour",
},
["W.h"] = {
name1 = "watt-hour",
symbol = "W⋅h",
utype = "energy",
scale = 3600,
default = "kJ",
link = "Kilowatt-hour",
},
["Wh"] = {
name1 = "watt-hour",
symbol = "Wh",
utype = "energy",
scale = 3600,
default = "kJ",
link = "Kilowatt-hour",
},
["μerg"] = {
name1 = "microerg",
symbol = "μerg",
utype = "energy",
scale = 1e-13,
default = "nJ",
link = "Erg",
},
["μeV"] = {
name1 = "microelectronvolt",
symbol = "μeV",
utype = "energy",
scale = 1.602176487e-25,
default = "yJ",
link = "Electronvolt",
},
["μW.h"] = {
name1 = "microwatt-hour",
symbol = "μW⋅h",
utype = "energy",
scale = 0.0036,
default = "mJ",
link = "Kilowatt-hour",
},
["μWh"] = {
name1 = "microwatt-hour",
symbol = "μWh",
utype = "energy",
scale = 0.0036,
default = "mJ",
link = "Kilowatt-hour",
},
["-kW.h"] = {
target = "kW.h",
link = "Kilowatt hour",
},
["btu"] = {
target = "BTU",
},
["Calorie"] = {
target = "Cal",
},
["ft.lbf"] = {
target = "ftlbf",
},
["ft·lbf"] = {
target = "ftlbf",
},
["g-cal-15"] = {
target = "cal-15",
},
["g-cal-IT"] = {
target = "cal-IT",
},
["g-cal-th"] = {
target = "cal-th",
},
["g-kcal-15"] = {
target = "kcal-15",
},
["g-kcal-IT"] = {
target = "kcal-IT",
},
["g-kcal-th"] = {
target = "kcal-th",
},
["g-Mcal-15"] = {
target = "Mcal-15",
},
["g-mcal-15"] = {
target = "mcal-15",
},
["g-Mcal-IT"] = {
target = "Mcal-IT",
},
["g-mcal-IT"] = {
target = "mcal-IT",
},
["g-Mcal-th"] = {
target = "Mcal-th",
},
["g-mcal-th"] = {
target = "mcal-th",
},
["GW-h"] = {
target = "GW.h",
},
["GW·h"] = {
target = "GW.h",
},
["Hartree"] = {
target = "Eh",
},
["hp.h"] = {
target = "hph",
},
["in.lb-f"] = {
target = "inlb-f",
},
["in.lbf"] = {
target = "inlbf",
},
["in.oz-f"] = {
target = "inoz-f",
},
["in.ozf"] = {
target = "inozf",
},
["kbboe"] = {
target = "kBOE",
symbol = "kbboe",
},
["kg-cal-15"] = {
target = "Cal-15",
},
["kg-cal-IT"] = {
target = "Cal-IT",
},
["kg-cal-th"] = {
target = "Cal-th",
},
["kW-h"] = {
target = "kW.h",
},
["kW·h"] = {
target = "kW.h",
},
["MW-h"] = {
target = "MW.h",
},
["mW-h"] = {
target = "mW.h",
},
["MW·h"] = {
target = "MW.h",
},
["TW-h"] = {
target = "TW.h",
},
["uerg"] = {
target = "μerg",
},
["ueV"] = {
target = "μeV",
},
["uW-h"] = {
target = "μW.h",
},
["uW.h"] = {
target = "μW.h",
},
["uWh"] = {
target = "μWh",
},
["W-h"] = {
target = "W.h",
},
["eVpar"] = {
_name1 = "electronvolt",
_symbol = "eV",
utype = "energy per chemical amount",
scale = 96485.329522144166,
prefixes = 1,
default = "kcal/mol",
link = "Electronvolt",
},
["kcal/mol"] = {
per = { "kcal", "mol" },
utype = "energy per chemical amount",
default = "kJ/mol",
link = "Kilocalorie per mole",
},
["kJ/mol"] = {
per = { "kJ", "mol" },
utype = "energy per chemical amount",
default = "kcal/mol",
link = "Joule per mole",
},
["kWh/100 km"] = {
name1 = "kilowatt-hour per 100 kilometres",
name1_us = "kilowatt-hour per 100 kilometers",
name2 = "kilowatt-hours per 100 kilometres",
name2_us = "kilowatt-hours per 100 kilometers",
symbol = "kW⋅h/100 km",
utype = "energy per unit length",
scale = 36,
default = "MJ/km kWh/mi",
link = "Kilowatt-hour",
},
["kWh/100 mi"] = {
name1 = "kilowatt-hour per 100 miles",
name2 = "kilowatt-hours per 100 miles",
symbol = "kW⋅h/100 mi",
utype = "energy per unit length",
scale = 22.3694,
default = "mpge",
link = "Miles per gallon gasoline equivalent",
},
["MJ/100 km"] = {
name1 = "megajoule per 100 kilometres",
name1_us = "megajoule per 100 kilometers",
name2 = "megajoules per 100 kilometres",
name2_us = "megajoules per 100 kilometers",
symbol = "MJ/100 km",
utype = "energy per unit length",
scale = 10,
default = "BTU/mi",
link = "British thermal unit",
},
["mpge"] = {
name1 = "mile per gallon gasoline equivalent",
name2 = "miles per gallon gasoline equivalent",
symbol = "mpg‑e",
utype = "energy per unit length",
scale = 13e-6,
invert = -1,
iscomplex= true,
default = "kWh/100 mi",
link = "Miles per gallon gasoline equivalent",
},
["BTU/mi"] = {
per = { "BTU", "mi" },
utype = "energy per unit length",
default = "v > 1525 ! M ! k ! J/km",
},
["kJ/km"] = {
per = { "kJ", "km" },
utype = "energy per unit length",
default = "BTU/mi",
},
["kWh/km"] = {
per = { "-kW.h", "km" },
utype = "energy per unit length",
default = "MJ/km kWh/mi",
},
["kWh/mi"] = {
per = { "-kW.h", "mi" },
utype = "energy per unit length",
default = "kWh/km MJ/km",
},
["MJ/km"] = {
per = { "MJ", "km" },
utype = "energy per unit length",
default = "BTU/mi",
},
["mpg-e"] = {
target = "mpge",
},
["BTU/lb"] = {
name1 = "British thermal unit per pound",
name2 = "British thermal units per pound",
symbol = "BTU/lb",
utype = "energy per unit mass",
scale = 429.92261414790346,
default = "kJ/kg",
link = "British thermal unit",
},
["cal/g"] = {
name1 = "calorie per gram",
name2 = "calories per gram",
symbol = "cal/g",
utype = "energy per unit mass",
scale = 4184,
default = "J/g",
},
["GJ/kg"] = {
name1 = "gigajoule per kilogram",
name2 = "gigajoules per kilogram",
symbol = "GJ/kg",
utype = "energy per unit mass",
scale = 1e9,
default = "ktTNT/t",
link = "Specific energy",
},
["J/g"] = {
name1 = "joule per gram",
name2 = "joules per gram",
symbol = "J/g",
utype = "energy per unit mass",
scale = 1000,
default = "kcal/g",
link = "Specific energy",
},
["kcal/g"] = {
name1 = "kilocalorie per gram",
name2 = "kilocalories per gram",
symbol = "kcal/g",
utype = "energy per unit mass",
scale = 4184000,
default = "kJ/g",
},
["kJ/g"] = {
name1 = "kilojoule per gram",
name2 = "kilojoules per gram",
symbol = "kJ/g",
utype = "energy per unit mass",
scale = 1000000,
default = "kcal/g",
link = "Specific energy",
},
["kJ/kg"] = {
name1 = "kilojoule per kilogram",
name2 = "kilojoules per kilogram",
symbol = "kJ/kg",
utype = "energy per unit mass",
scale = 1000,
default = "BTU/lb",
link = "Specific energy",
},
["ktonTNT/MT"] = {
name2 = "kilotons of TNT per metric ton",
symbol = "kiloton of TNT per metric ton",
usename = 1,
utype = "energy per unit mass",
scale = 4184000000,
default = "GJ/kg",
link = "TNT equivalent",
},
["ktTNT/t"] = {
name2 = "kilotonnes of TNT per tonne",
symbol = "kilotonne of TNT per tonne",
usename = 1,
utype = "energy per unit mass",
scale = 4184000000,
default = "GJ/kg",
link = "TNT equivalent",
},
["MtonTNT/MT"] = {
name2 = "megatons of TNT per metric ton",
symbol = "megaton of TNT per metric ton",
usename = 1,
utype = "energy per unit mass",
scale = 4.184e12,
default = "TJ/kg",
link = "TNT equivalent",
},
["MtTNT/MT"] = {
name2 = "megatonnes of TNT per tonne",
symbol = "megatonne of TNT per tonne",
usename = 1,
utype = "energy per unit mass",
scale = 4.184e12,
default = "TJ/kg",
link = "TNT equivalent",
},
["TJ/kg"] = {
name1 = "terajoule per kilogram",
name2 = "terajoules per kilogram",
symbol = "TJ/kg",
utype = "energy per unit mass",
scale = 1e12,
default = "MtTNT/MT",
link = "Specific energy",
},
["Cal/g"] = {
per = { "Cal", "g" },
utype = "energy per unit mass",
default = "kJ/g",
},
["BTU/cuft"] = {
per = { "BTU", "cuft" },
utype = "energy per unit volume",
default = "kJ/L",
},
["Cal/12USoz(mL)serve"] = {
per = { "Cal", "-12USoz(mL)serve" },
utype = "energy per unit volume",
default = "kJ/L",
},
["Cal/12USoz(ml)serve"] = {
per = { "Cal", "-12USoz(ml)serve" },
utype = "energy per unit volume",
default = "kJ/l",
},
["Cal/12USozserve"] = {
per = { "Cal", "-12USozserve" },
utype = "energy per unit volume",
default = "kJ/L",
},
["Cal/USoz"] = {
per = { "Cal", "USoz" },
utype = "energy per unit volume",
default = "kJ/ml",
},
["kJ/L"] = {
per = { "kJ", "L" },
utype = "energy per unit volume",
default = "BTU/cuft",
},
["kJ/l"] = {
per = { "kJ", "l" },
utype = "energy per unit volume",
default = "BTU/cuft",
},
["kJ/ml"] = {
per = { "kJ", "ml" },
utype = "energy per unit volume",
default = "Cal/USoz",
},
["MJ/m3"] = {
per = { "MJ", "m3" },
utype = "energy per unit volume",
default = "BTU/cuft",
},
["Sv"] = {
_name1 = "sievert",
_symbol = "Sv",
utype = "equivalent radiation dose",
scale = 1,
prefixes = 1,
default = "rem",
link = "Sievert",
},
["rem"] = {
_name1 = "rem",
_symbol = "rem",
utype = "equivalent radiation dose",
scale = 0.01,
prefixes = 1,
default = "Sv",
link = "Roentgen equivalent man",
},
["g/km"] = {
name1 = "gram per kilometre",
name1_us = "gram per kilometer",
name2 = "grams per kilometre",
name2_us = "grams per kilometer",
symbol = "g/km",
utype = "exhaust emission",
scale = 1e-6,
default = "oz/mi",
link = "Exhaust gas",
},
["g/mi"] = {
name1 = "gram per mile",
name2 = "grams per mile",
symbol = "g/mi",
utype = "exhaust emission",
scale = 6.2137119223733397e-7,
default = "g/km",
link = "Exhaust gas",
},
["gCO2/km"] = {
name1 = "gram of CO<sub>2</sub> per kilometre",
name1_us = "gram of CO<sub>2</sub> per kilometer",
name2 = "grams of CO<sub>2</sub> per kilometre",
name2_us = "grams of CO<sub>2</sub> per kilometer",
symbol = "g(CO<sub>2</sub>)/km",
utype = "exhaust emission",
scale = 1e-6,
default = "ozCO2/mi",
link = "Exhaust gas",
},
["gCO2/mi"] = {
name1 = "gram of CO<sub>2</sub> per mile",
name2 = "grams of CO<sub>2</sub> per mile",
symbol = "g(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 6.2137119223733397e-7,
default = "gCO2/km",
link = "Exhaust gas",
},
["kg/km"] = {
name1 = "kilogram per kilometre",
name1_us = "kilogram per kilometer",
name2 = "kilograms per kilometre",
name2_us = "kilograms per kilometer",
symbol = "kg/km",
utype = "exhaust emission",
scale = 0.001,
default = "lb/mi",
link = "Exhaust gas",
},
["kgCO2/km"] = {
name1 = "kilogram of CO<sub>2</sub> per kilometre",
name1_us = "kilogram of CO<sub>2</sub> per kilometer",
name2 = "kilograms of CO<sub>2</sub> per kilometre",
name2_us = "kilograms of CO<sub>2</sub> per kilometer",
symbol = "kg(CO<sub>2</sub>)/km",
utype = "exhaust emission",
scale = 0.001,
default = "lbCO2/mi",
link = "Exhaust gas",
},
["lb/mi"] = {
name1 = "pound per mile",
name2 = "pounds per mile",
symbol = "lb/mi",
utype = "exhaust emission",
scale = 0.00028184923173665794,
default = "kg/km",
link = "Exhaust gas",
},
["lbCO2/mi"] = {
name1 = "pound of CO<sub>2</sub> per mile",
name2 = "pounds of CO<sub>2</sub> per mile",
symbol = "lb(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 0.00028184923173665794,
default = "kgCO2/km",
link = "Exhaust gas",
},
["oz/mi"] = {
name1 = "ounce per mile",
name2 = "ounces per mile",
symbol = "oz/mi",
utype = "exhaust emission",
scale = 1.7615576983541121e-5,
default = "g/km",
link = "Exhaust gas",
},
["ozCO2/mi"] = {
name1 = "ounce of CO<sub>2</sub> per mile",
name2 = "ounces of CO<sub>2</sub> per mile",
symbol = "oz(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 1.7615576983541121e-5,
default = "gCO2/km",
link = "Exhaust gas",
},
["cuft/a"] = {
name1 = "cubic foot per annum",
name2 = "cubic feet per annum",
symbol = "cu ft/a",
utype = "flow",
scale = 8.9730672142368242e-10,
default = "m3/a",
link = "Cubic foot per second",
},
["cuft/d"] = {
name1 = "cubic foot per day",
name2 = "cubic feet per day",
symbol = "cu ft/d",
utype = "flow",
scale = 3.2774128000000003e-7,
default = "m3/d",
link = "Cubic foot per second",
},
["cuft/h"] = {
name1 = "cubic foot per hour",
name2 = "cubic feet per hour",
symbol = "cu ft/h",
utype = "flow",
scale = 7.8657907200000004e-6,
default = "m3/h",
link = "Cubic foot per second",
},
["cuft/min"] = {
name1 = "cubic foot per minute",
name2 = "cubic feet per minute",
symbol = "cu ft/min",
utype = "flow",
scale = 0.00047194744319999999,
default = "m3/min",
},
["cuft/s"] = {
name1 = "cubic foot per second",
name2 = "cubic feet per second",
symbol = "cu ft/s",
utype = "flow",
scale = 28316846592e-12,
default = "m3/s",
},
["cumi/a"] = {
name1 = "cubic mile per annum",
name2 = "cubic miles per annum",
symbol = "cu mi/a",
utype = "flow",
scale = 132.08171170940057,
default = "km3/a",
link = "Cubic foot per second",
},
["cuyd/h"] = {
name1 = "cubic yard per hour",
name2 = "cubic yards per hour",
symbol = "cuyd/h",
utype = "flow",
scale = 0.00021237634944000001,
default = "m3/h",
link = "Cubic foot per second",
},
["cuyd/s"] = {
name1 = "cubic yard per second",
name2 = "cubic yards per second",
symbol = "cu yd/s",
utype = "flow",
scale = 0.76455485798400002,
default = "m3/s",
},
["Goilbbl/a"] = {
name1 = "billion barrels per year",
name2 = "billion barrels per year",
symbol = "Gbbl/a",
utype = "flow",
scale = 5.0380033629933836,
default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3/a",
link = "Barrel per day",
},
["impgal/h"] = {
name1 = "imperial gallon per hour",
name2 = "imperial gallons per hour",
symbol = "imp gal/h",
utype = "flow",
scale = 1.2628027777777779e-6,
default = "m3/h",
link = "Gallon",
},
["impgal/min"] = {
name1 = "imperial gallon per minute",
name2 = "imperial gallons per minute",
symbol = "imp gal/min",
utype = "flow",
scale = 7.5768166666666671e-5,
default = "m3/s",
link = "Gallon",
},
["impgal/s"] = {
name1 = "imperial gallon per second",
name2 = "imperial gallons per second",
symbol = "impgal/s",
utype = "flow",
scale = 0.00454609,
default = "m3/s",
link = "Imperial gallons per second",
},
["km3/a"] = {
name1 = "cubic kilometre per annum",
name1_us = "cubic kilometer per annum",
name2 = "cubic kilometres per annum",
name2_us = "cubic kilometers per annum",
symbol = "km<sup>3</sup>/a",
utype = "flow",
scale = 31.68808781402895,
default = "cumi/a",
link = "Cubic metre per second",
},
["km3/d"] = {
name1 = "cubic kilometre per day",
name1_us = "cubic kilometer per day",
name2 = "cubic kilometres per day",
name2_us = "cubic kilometers per day",
symbol = "km<sup>3</sup>/d",
utype = "flow",
scale = 11574.074074074075,
default = "cuft/d",
link = "Cubic metre per second",
},
["koilbbl/a"] = {
name1 = "thousand barrels per year",
name2 = "thousand barrels per year",
symbol = "kbbl/a",
utype = "flow",
scale = 5.0380033629933841e-6,
default = "v * 1.58987294928 < 10 ! ! e3 ! m3/a",
link = "Barrel per day",
},
["koilbbl/d"] = {
name1 = "thousand barrels per day",
name2 = "thousand barrels per day",
symbol = "kbbl/d",
utype = "flow",
scale = 0.0018401307283333335,
default = "v * 1.58987294928 < 10 ! ! e3 ! m3/d",
link = "Barrel per day",
},
["L/h"] = {
name1 = "litre per hour",
name1_us = "liter per hour",
name2 = "litres per hour",
name2_us = "liters per hour",
symbol = "L/h",
utype = "flow",
scale = 2.7777777777777776e-7,
default = "impgal/h USgal/h",
link = "Cubic metre per second",
},
["L/min"] = {
name1 = "litre per minute",
name1_us = "liter per minute",
name2 = "litres per minute",
name2_us = "liters per minute",
symbol = "L/min",
utype = "flow",
scale = 1.6666666666666667e-5,
default = "impgal/min USgal/min",
link = "Cubic metre per second",
},
["L/s"] = {
name1 = "litre per second",
name1_us = "liter per second",
name2 = "litres per second",
name2_us = "liters per second",
symbol = "L/s",
utype = "flow",
scale = 0.001,
default = "cuft/s",
link = "Cubic metre per second",
},
["m3/a"] = {
name1 = "cubic metre per annum",
name1_us = "cubic meter per annum",
name2 = "cubic metres per annum",
name2_us = "cubic meters per annum",
symbol = "m<sup>3</sup>/a",
utype = "flow",
scale = 3.1688087814028947e-8,
default = "cuft/a",
link = "Cubic metre per second",
},
["m3/d"] = {
name1 = "cubic metre per day",
name1_us = "cubic meter per day",
name2 = "cubic metres per day",
name2_us = "cubic meters per day",
symbol = "m<sup>3</sup>/d",
utype = "flow",
scale = 1.1574074074074073e-5,
default = "cuft/d",
link = "Cubic metre per second",
},
["m3/h"] = {
name1 = "cubic metre per hour",
name1_us = "cubic meter per hour",
name2 = "cubic metres per hour",
name2_us = "cubic meters per hour",
symbol = "m<sup>3</sup>/h",
utype = "flow",
scale = 0.00027777777777777778,
default = "cuft/h",
link = "Cubic metre per second",
},
["m3/min"] = {
name1 = "cubic metre per minute",
name1_us = "cubic meter per minute",
name2 = "cubic metres per minute",
name2_us = "cubic meters per minute",
symbol = "m<sup>3</sup>/min",
utype = "flow",
scale = 0.016666666666666666,
default = "cuft/min",
link = "Cubic metre per second",
},
["m3/s"] = {
name1 = "cubic metre per second",
name1_us = "cubic meter per second",
name2 = "cubic metres per second",
name2_us = "cubic meters per second",
symbol = "m<sup>3</sup>/s",
utype = "flow",
scale = 1,
default = "cuft/s",
},
["Moilbbl/a"] = {
name1 = "million barrels per year",
name2 = "million barrels per year",
symbol = "Mbbl/a",
utype = "flow",
scale = 0.0050380033629933837,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/a",
link = "Barrel per day",
},
["Moilbbl/d"] = {
name1 = "million barrels per day",
name2 = "million barrels per day",
symbol = "Mbbl/d",
utype = "flow",
scale = 1.8401307283333335,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/d",
link = "Barrel per day",
},
["oilbbl/a"] = {
name1 = "barrel per year",
name2 = "barrels per year",
symbol = "bbl/a",
utype = "flow",
scale = 5.0380033629933841e-9,
default = "m3/a",
link = "Barrel per day",
},
["oilbbl/d"] = {
name1 = "barrel per day",
name2 = "barrels per day",
symbol = "bbl/d",
utype = "flow",
scale = 1.8401307283333336e-6,
default = "m3/d",
},
["Toilbbl/a"] = {
name1 = "trillion barrels per year",
name2 = "trillion barrels per year",
symbol = "Tbbl/a",
utype = "flow",
scale = 5038.0033629933832,
default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3/a",
link = "Barrel per day",
},
["U.S.gal/d"] = {
name1 = "U.S. gallon per day",
name2 = "U.S. gallons per day",
symbol = "U.S. gal/d",
utype = "flow",
scale = 4.3812636388888893e-8,
default = "m3/s",
customary= 1,
},
["U.S.gal/h"] = {
name1 = "gallon per hour",
name2 = "gallons per hour",
symbol = "gal/h",
utype = "flow",
scale = 1.0515032733333334e-6,
default = "m3/h",
link = "Gallon",
customary= 2,
},
["U.S.gal/min"] = {
name1 = "U.S. gallon per minute",
name2 = "U.S. gallons per minute",
symbol = "U.S. gal/min",
utype = "flow",
scale = 6.3090196400000003e-5,
default = "m3/s",
link = "Gallon",
},
["USgal/a"] = {
name1 = "US gallon per year",
name2 = "US gallons per year",
symbol = "US gal/a",
utype = "flow",
scale = 1.1995246102365199e-10,
default = "m3/s",
},
["USgal/d"] = {
name1 = "US gallon per day",
name2 = "US gallons per day",
symbol = "US gal/d",
utype = "flow",
scale = 4.3812636388888893e-8,
default = "m3/s",
},
["USgal/h"] = {
name1 = "gallon per hour",
name2 = "gallons per hour",
symbol = "gal/h",
utype = "flow",
scale = 1.0515032733333334e-6,
default = "m3/h",
link = "Gallon",
customary= 1,
},
["USgal/min"] = {
name1 = "US gallon per minute",
name2 = "US gallons per minute",
symbol = "US gal/min",
utype = "flow",
scale = 6.3090196400000003e-5,
default = "m3/s",
link = "Gallon",
},
["USgal/s"] = {
name1 = "US gallon per second",
name1_us = "U.S. gallon per second",
name2 = "US gallons per second",
name2_us = "U.S. gallons per second",
symbol = "USgal/s",
utype = "flow",
scale = 0.003785411784,
default = "m3/s",
link = "US gallons per second",
},
["ft3/a"] = {
target = "cuft/a",
},
["ft3/d"] = {
target = "cuft/d",
},
["ft3/h"] = {
target = "cuft/h",
},
["ft3/s"] = {
target = "cuft/s",
},
["Gcuft/a"] = {
target = "e9cuft/a",
},
["Gcuft/d"] = {
target = "e9cuft/d",
},
["kcuft/a"] = {
target = "e3cuft/a",
},
["kcuft/d"] = {
target = "e3cuft/d",
},
["kcuft/s"] = {
target = "e3cuft/s",
},
["Mcuft/a"] = {
target = "e6cuft/a",
},
["Mcuft/d"] = {
target = "e6cuft/d",
},
["Mcuft/s"] = {
target = "e6cuft/s",
},
["m³/s"] = {
target = "m3/s",
},
["Tcuft/a"] = {
target = "e12cuft/a",
},
["Tcuft/d"] = {
target = "e12cuft/d",
},
["u.s.gal/min"] = {
target = "U.S.gal/min",
},
["usgal/min"] = {
target = "USgal/min",
},
["-LTf"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "LTf",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["-STf"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "STf",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["dyn"] = {
name1 = "dyne",
symbol = "dyn",
utype = "force",
scale = 0.00001,
default = "gr-f",
},
["g-f"] = {
name1 = "gram-force",
name2 = "grams-force",
symbol = "g<sub>f</sub>",
utype = "force",
scale = 0.00980665,
default = "mN oz-f",
link = "Kilogram-force",
},
["gf"] = {
name1 = "gram-force",
name2 = "grams-force",
symbol = "gf",
utype = "force",
scale = 0.00980665,
default = "mN ozf",
link = "Kilogram-force",
},
["gr-f"] = {
name1 = "grain-force",
name2 = "grains-force",
symbol = "gr<sub>f</sub>",
utype = "force",
scale = 0.0006354602307515,
default = "μN",
link = "Pound (force)",
},
["grf"] = {
name1 = "grain-force",
name2 = "grains-force",
symbol = "grf",
utype = "force",
scale = 0.0006354602307515,
default = "μN",
link = "Pound (force)",
},
["kdyn"] = {
name1 = "kilodyne",
symbol = "kdyn",
utype = "force",
scale = 0.01,
default = "oz-f",
link = "Dyne",
},
["kg-f"] = {
name1 = "kilogram-force",
name2 = "kilograms-force",
symbol = "kg<sub>f</sub>",
utype = "force",
scale = 9.80665,
default = "N lb-f",
},
["kgf"] = {
name1 = "kilogram-force",
name2 = "kilograms-force",
symbol = "kgf",
utype = "force",
scale = 9.80665,
default = "N lbf",
},
["kp"] = {
name1 = "kilopond",
symbol = "kp",
utype = "force",
scale = 9.80665,
default = "N lb-f",
link = "Kilogram-force",
},
["L/T-f"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "L/T<sub>f</sub>",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["L/Tf"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "L/Tf",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["lb-f"] = {
name1 = "pound-force",
name2 = "pounds-force",
symbol = "lb<sub>f</sub>",
utype = "force",
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["lbf"] = {
name1 = "pound-force",
name2 = "pounds-force",
symbol = "lbf",
utype = "force",
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["lb(f)"] = {
name1 = "pound",
symbol = "lb",
utype = "force",
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["LT-f"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "LT<sub>f</sub>",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["LTf"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "LTf",
usename = 1,
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["Mdyn"] = {
name1 = "megadyne",
symbol = "Mdyn",
utype = "force",
scale = 10,
default = "lb-f",
link = "Dyne",
},
["mdyn"] = {
name1 = "millidyne",
symbol = "mdyn",
utype = "force",
scale = 0.00000001,
default = "gr-f",
link = "Dyne",
},
["mg-f"] = {
name1 = "milligram-force",
name2 = "milligrams-force",
symbol = "mg<sub>f</sub>",
utype = "force",
scale = 0.00000980665,
default = "μN gr-f",
link = "Kilogram-force",
},
["mgf"] = {
name1 = "milligram-force",
name2 = "milligrams-force",
symbol = "mgf",
utype = "force",
scale = 0.00000980665,
default = "μN grf",
link = "Kilogram-force",
},
["Mp"] = {
name1 = "megapond",
symbol = "Mp",
utype = "force",
scale = 9806.65,
default = "kN LT-f ST-f",
link = "Kilogram-force",
},
["mp"] = {
name1 = "millipond",
symbol = "mp",
utype = "force",
scale = 0.00000980665,
default = "μN gr-f",
link = "Kilogram-force",
},
["N"] = {
_name1 = "newton",
_symbol = "N",
utype = "force",
scale = 1,
prefixes = 1,
default = "lb-f",
link = "Newton (unit)",
},
["oz-f"] = {
name1 = "ounce-force",
name2 = "ounces-force",
symbol = "oz<sub>f</sub>",
utype = "force",
scale = 0.2780138203095378125,
default = "mN",
link = "Pound (force)",
},
["ozf"] = {
name1 = "ounce-force",
name2 = "ounces-force",
symbol = "ozf",
utype = "force",
scale = 0.2780138203095378125,
default = "mN",
link = "Pound (force)",
},
["p"] = {
name1 = "pond",
symbol = "p",
utype = "force",
scale = 0.00980665,
default = "mN oz-f",
link = "Kilogram-force",
},
["pdl"] = {
name1 = "poundal",
symbol = "pdl",
utype = "force",
scale = 0.138254954376,
default = "N",
},
["S/T-f"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "S/T<sub>f</sub>",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["S/Tf"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "S/Tf",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["ST-f"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "ST<sub>f</sub>",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["STf"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "STf",
usename = 1,
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["t-f"] = {
name1 = "tonne-force",
name2 = "tonnes-force",
symbol = "t<sub>f</sub>",
utype = "force",
scale = 9806.65,
default = "kN LT-f ST-f",
link = "Ton-force#Tonne-force",
},
["tf"] = {
name1 = "tonne-force",
name2 = "tonnes-force",
symbol = "tf",
utype = "force",
scale = 9806.65,
default = "kN LTf STf",
link = "Ton-force#Tonne-force",
},
["dyne"] = {
target = "dyn",
},
["newtons"] = {
target = "N",
},
["poundal"] = {
target = "pdl",
},
["tonne-force"] = {
target = "tf",
},
["impgal/mi"] = {
per = { "@impgal", "mi" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "l/km USgal/mi",
},
["km/L"] = {
per = { "km", "L" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "mpgimp mpgus",
},
["km/l"] = {
per = { "km", "l" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "mpgimp mpgus",
},
["L/100 km"] = {
per = { "L", "100km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|L/100 km]]",
},
["l/100 km"] = {
per = { "l", "100km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|l/100 km]]",
},
["L/km"] = {
per = { "L", "km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
},
["l/km"] = {
per = { "l", "km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
},
["mi/impqt"] = {
per = { "mi", "impqt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mi/U.S.qt"] = {
per = { "mi", "U.S.qt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mi/USqt"] = {
per = { "mi", "USqt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mi/usqt"] = {
per = { "mi", "usqt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mpgimp"] = {
per = { "mi", "@impgal" },
symbol = "mpg<sub>‑imp</sub>",
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "L/100 km+mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[Imperial units|imp]]</sub>",
},
["mpgus"] = {
per = { "mi", "+USgal" },
symbol = "mpg<sub>‑US</sub>",
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "L/100 km+mpgimp",
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[United States customary units|US]]</sub>",
},
["U.S.gal/mi"] = {
per = { "*U.S.gal", "mi" },
sp_us = true,
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "l/km impgal/mi",
},
["usgal/mi"] = {
per = { "+USgal", "mi" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "l/km impgal/mi",
},
["L/100km"] = {
target = "L/100 km",
},
["l/100km"] = {
target = "l/100 km",
},
["mpg"] = {
shouldbe = "Use %{mpgus%} for miles per US gallon or %{mpgimp%} for miles per imperial gallon (not %{mpg%})",
},
["mpgU.S."] = {
target = "mpgus",
symbol = "mpg<sub>‑U.S.</sub>",
sp_us = true,
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[United States customary units|U.S.]]</sub>",
},
["mpgu.s."] = {
target = "mpgus",
symbol = "mpg<sub>‑U.S.</sub>",
sp_us = true,
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[United States customary units|U.S.]]</sub>",
},
["mpgUS"] = {
target = "mpgus",
},
["USgal/mi"] = {
target = "usgal/mi",
},
["kPa/m"] = {
per = { "kPa", "-m-frac" },
utype = "fracture gradient",
default = "psi/ft",
},
["psi/ft"] = {
per = { "psi", "-ft-frac" },
utype = "fracture gradient",
default = "kPa/m",
},
["cm/km"] = {
name1 = "centimetre per kilometre",
name1_us = "centimeter per kilometer",
name2 = "centimetres per kilometre",
name2_us = "centimeters per kilometer",
symbol = "cm/km",
utype = "gradient",
scale = 0.00001,
default = "ft/mi",
link = "Grade (slope)",
},
["ft/mi"] = {
name1 = "foot per mile",
name2 = "feet per mile",
symbol = "ft/mi",
utype = "gradient",
scale = 0.00018939393939393939,
default = "v < 5.28 ! c ! ! m/km",
link = "Grade (slope)",
},
["ft/nmi"] = {
name1 = "foot per nautical mile",
name2 = "feet per nautical mile",
symbol = "ft/nmi",
utype = "gradient",
scale = 0.00016457883369330455,
default = "v < 6.076 ! c ! ! m/km",
link = "Grade (slope)",
},
["in/ft"] = {
name1 = "inch per foot",
name2 = "inches per foot",
symbol = "in/ft",
utype = "gradient",
scale = 0.083333333333333329,
default = "mm/m",
link = "Grade (slope)",
},
["in/mi"] = {
name1 = "inch per mile",
name2 = "inches per mile",
symbol = "in/mi",
utype = "gradient",
scale = 1.5782828282828283e-5,
default = "v < 0.6336 ! m ! c ! m/km",
link = "Grade (slope)",
},
["m/km"] = {
name1 = "metre per kilometre",
name1_us = "meter per kilometer",
name2 = "metres per kilometre",
name2_us = "meters per kilometer",
symbol = "m/km",
utype = "gradient",
scale = 0.001,
default = "ft/mi",
link = "Grade (slope)",
},
["mm/km"] = {
name1 = "millimetre per kilometre",
name1_us = "millimeter per kilometer",
name2 = "millimetres per kilometre",
name2_us = "millimeters per kilometer",
symbol = "mm/km",
utype = "gradient",
scale = 0.000001,
default = "in/mi",
link = "Grade (slope)",
},
["mm/m"] = {
name1 = "millimetre per metre",
name1_us = "millimeter per meter",
name2 = "millimetres per metre",
name2_us = "millimeters per meter",
symbol = "mm/m",
utype = "gradient",
scale = 0.001,
default = "in/ft",
link = "Grade (slope)",
},
["admi"] = {
name1 = "admiralty mile",
symbol = "nmi (admiralty)",
utype = "length",
scale = 1853.184,
default = "km mi",
link = "Nautical mile",
},
["AU"] = {
name1 = "astronomical unit",
symbol = "AU",
utype = "length",
scale = 149597870700,
default = "km mi",
},
["Brnmi"] = {
name1 = "British nautical mile",
symbol = "(Brit) nmi",
utype = "length",
scale = 1853.184,
default = "km mi",
link = "Nautical mile",
},
["bu"] = {
name2 = "bu",
symbol = "bu",
usename = 1,
utype = "length",
scale = 0.0030303030303030303,
default = "mm",
link = "Japanese units of measurement#Length",
},
["ch"] = {
name1 = "chain",
symbol = "ch",
utype = "length",
scale = 20.1168,
default = "ft m",
subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
link = "Chain (unit)",
},
["chlk"] = {
name1 = "[[Chain (unit)|chain]]",
symbol = "[[Chain (unit)|ch]]",
utype = "length",
scale = 20.1168,
default = "ft m",
link = "",
},
["chain"] = {
symbol = "chain",
usename = 1,
utype = "length",
scale = 20.1168,
default = "ft m",
subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
link = "Chain (unit)",
},
["chainlk"] = {
symbol = "[[Chain (unit)|chain]]",
usename = 1,
utype = "length",
scale = 20.1168,
default = "ft m",
link = "",
},
["dpcm"] = {
name2 = "dot/cm",
symbol = "dot/cm",
utype = "length",
scale = 100,
invert = -1,
iscomplex= true,
default = "dpi",
link = "Dots per inch",
},
["dpi"] = {
name2 = "DPI",
symbol = "DPI",
utype = "length",
scale = 39.370078740157481,
invert = -1,
iscomplex= true,
default = "pitch",
link = "Dots per inch",
},
["fathom"] = {
symbol = "fathom",
usename = 1,
utype = "length",
scale = 1.8288,
default = "ft m",
},
["foot"] = {
name1 = "foot",
name2 = "foot",
symbol = "ft",
utype = "length",
scale = 0.3048,
default = "m",
subdivs = { ["in"] = { 12, default = "m" } },
link = "Foot (unit)",
},
["ft"] = {
name1 = "foot",
name2 = "feet",
symbol = "ft",
utype = "length",
scale = 0.3048,
exception= "integer_more_precision",
default = "m",
subdivs = { ["in"] = { 12, default = "m" } },
link = "Foot (unit)",
},
["furlong"] = {
symbol = "furlong",
usename = 1,
utype = "length",
scale = 201.168,
default = "ft m",
},
["Gly"] = {
name1 = "gigalight-year",
symbol = "Gly",
utype = "length",
scale = 9.4607304725808e24,
default = "Mpc",
link = "Light-year#Definitions",
},
["Gpc"] = {
name1 = "gigaparsec",
symbol = "Gpc",
utype = "length",
scale = 3.0856775814671916e25,
default = "Gly",
link = "Parsec#Megaparsecs and gigaparsecs",
},
["hand"] = {
name1 = "hand",
symbol = "h",
utype = "length",
builtin = "hand",
scale = 0.1016,
iscomplex= true,
default = "in cm",
link = "Hand (unit)",
},
["in"] = {
name1 = "inch",
name2 = "inches",
symbol = "in",
utype = "length",
scale = 0.0254,
exception= "subunit_more_precision",
default = "mm",
},
["inabbreviated"] = {
name2 = "in",
symbol = "in",
utype = "length",
scale = 0.0254,
default = "mm",
link = "Inch",
},
["kly"] = {
name1 = "kilolight-year",
symbol = "kly",
utype = "length",
scale = 9.4607304725808e18,
default = "pc",
link = "Light-year#Definitions",
},
["kpc"] = {
name1 = "kiloparsec",
symbol = "kpc",
utype = "length",
scale = 3.0856775814671916e19,
default = "kly",
link = "Parsec#Parsecs and kiloparsecs",
},
["LD"] = {
name1 = "lunar distance",
symbol = "LD",
utype = "length",
scale = 384403000,
default = "km mi",
link = "Lunar distance (astronomy)",
},
["league"] = {
symbol = "league",
usename = 1,
utype = "length",
scale = 4828.032,
default = "km",
link = "League (unit)",
},
["ly"] = {
name1 = "light-year",
symbol = "ly",
utype = "length",
scale = 9.4607304725808e15,
default = "AU",
},
["m"] = {
_name1 = "metre",
_name1_us= "meter",
_symbol = "m",
utype = "length",
scale = 1,
prefixes = 1,
default = "v > 0 and v < 3 ! ftin ! ft",
link = "Metre",
},
["mi"] = {
name1 = "mile",
symbol = "mi",
utype = "length",
scale = 1609.344,
default = "km",
subdivs = { ["ch"] = { 80, default = "km" }, ["chlk"] = { 80, default = "km" }, ["chain"] = { 80, default = "km" }, ["chainlk"] = { 80, default = "km" }, ["ft"] = { 5280, default = "km" }, ["furlong"] = { 8, default = "km" }, ["yd"] = { 1760, default = "km" } },
},
["mil"] = {
symbol = "mil",
usename = 1,
utype = "length",
scale = 0.0000254,
default = "mm",
link = "Thousandth of an inch",
},
["Mly"] = {
name1 = "megalight-year",
symbol = "Mly",
utype = "length",
scale = 9.4607304725808e21,
default = "kpc",
link = "Light-year#Definitions",
},
["Mpc"] = {
name1 = "megaparsec",
symbol = "Mpc",
utype = "length",
scale = 3.0856775814671916e22,
default = "Mly",
link = "Parsec#Megaparsecs and gigaparsecs",
},
["NM"] = {
name1 = "nautical mile",
symbol = "NM",
utype = "length",
scale = 1852,
default = "km mi",
},
["nmi"] = {
name1 = "nautical mile",
symbol = "nmi",
utype = "length",
scale = 1852,
default = "km mi",
},
["oldUKnmi"] = {
name1 = "nautical mile",
symbol = "nmi",
utype = "length",
scale = 1853.184,
default = "km mi",
},
["oldUSnmi"] = {
name1 = "nautical mile",
symbol = "nmi",
utype = "length",
scale = 1853.24496,
default = "km mi",
},
["pc"] = {
name1 = "parsec",
symbol = "pc",
utype = "length",
scale = 3.0856775814671916e16,
default = "ly",
},
["perch"] = {
name2 = "perches",
symbol = "perch",
usename = 1,
utype = "length",
scale = 5.0292,
default = "ft m",
link = "Rod (unit)",
},
["pitch"] = {
name2 = "μm",
symbol = "μm",
utype = "length",
scale = 1e-6,
default = "dpi",
defkey = "pitch",
linkey = "pitch",
link = "Dots per inch",
},
["pole"] = {
symbol = "pole",
usename = 1,
utype = "length",
scale = 5.0292,
default = "ft m",
link = "Rod (unit)",
},
["pre1954U.S.nmi"] = {
name1 = "(pre-1954 U.S.) nautical mile",
symbol = "(pre‑1954 U.S.) nmi",
utype = "length",
scale = 1853.24496,
default = "km mi",
link = "Nautical mile",
},
["pre1954USnmi"] = {
name1 = "(pre-1954 US) nautical mile",
name1_us = "(pre-1954 U.S.) nautical mile",
symbol = "(pre‑1954 US) nmi",
sym_us = "(pre‑1954 U.S.) nmi",
utype = "length",
scale = 1853.24496,
default = "km mi",
link = "Nautical mile",
},
["rd"] = {
name1 = "rod",
symbol = "rd",
utype = "length",
scale = 5.0292,
default = "ft m",
link = "Rod (unit)",
},
["royal cubit"] = {
name1 = "royal cubit",
symbol = "cu",
utype = "length",
scale = 0.524,
default = "mm",
},
["rtkm"] = {
name1 = "route kilometre",
name1_us = "route kilometer",
symbol = "km",
utype = "length",
scale = 1000,
default = "mi",
link = "Kilometre",
},
["rtmi"] = {
name1 = "route mile",
symbol = "mi",
utype = "length",
scale = 1609.344,
default = "km",
link = "Mile",
},
["shaku"] = {
name2 = "shaku",
symbol = "shaku",
usename = 1,
utype = "length",
scale = 0.30303030303030304,
default = "m",
link = "Shaku (unit)",
},
["sm"] = {
name1 = "smoot",
symbol = "sm",
utype = "length",
scale = 1.70180,
default = "m",
link = "Smoot (unit)",
},
["smi"] = {
name1 = "statute mile",
symbol = "mi",
utype = "length",
scale = 1609.344,
default = "km",
subdivs = { ["chain"] = { 80, default = "km" } },
},
["solar radius"] = {
name1 = "solar radius",
name2 = "solar radii",
symbol = "''R''<sub>☉</sub>",
utype = "length",
scale = 695700e3,
default = "km",
},
["sun"] = {
name2 = "sun",
symbol = "sun",
usename = 1,
utype = "length",
scale = 0.030303030303030304,
default = "mm",
link = "Japanese units of measurement#Length",
},
["thou"] = {
name2 = "thou",
symbol = "thou",
usename = 1,
utype = "length",
scale = 0.0000254,
default = "mm",
link = "Thousandth of an inch",
},
["verst"] = {
symbol = "verst",
usename = 1,
utype = "length",
scale = 1066.8,
default = "km mi",
},
["yd"] = {
name1 = "yard",
symbol = "yd",
utype = "length",
scale = 0.9144,
default = "m",
subdivs = { ["ft"] = { 3, default = "m" } },
},
["μin"] = {
name1 = "microinch",
name2 = "microinches",
symbol = "μin",
utype = "length",
scale = 0.0000000254,
default = "nm",
link = "SI prefix#Non-metric units",
},
["Å"] = {
name1 = "ångström",
symbol = "Å",
utype = "length",
scale = 0.0000000001,
default = "in",
},
["Hz"] = {
_name1 = "hertz",
_name2 = "hertz",
_symbol = "Hz",
utype = "length",
scale = 3.3356409519815204e-9,
invert = -1,
iscomplex= true,
prefixes = 1,
default = "m",
link = "Hertz",
},
["rpm"] = {
name1 = "revolution per minute",
name2 = "revolutions per minute",
symbol = "rpm",
utype = "length",
scale = 5.5594015866358675e-11,
invert = -1,
iscomplex= true,
default = "Hz",
link = "Revolutions per minute",
},
["-ft-frac"] = {
target = "ft",
link = "Fracture gradient",
},
["-in-stiff"] = {
target = "in",
link = "Stiffness",
},
["-m-frac"] = {
target = "m",
link = "Fracture gradient",
},
["-m-stiff"] = {
target = "m",
link = "Stiffness",
},
["100km"] = {
target = "km",
multiplier= 100,
},
["100mi"] = {
target = "mi",
multiplier= 100,
},
["100miles"] = {
target = "mi",
symbol = "miles",
multiplier= 100,
},
["admiralty nmi"] = {
target = "oldUKnmi",
},
["angstrom"] = {
target = "Å",
},
["au"] = {
target = "AU",
symbol = "au",
},
["feet"] = {
target = "ft",
},
["hands"] = {
target = "hand",
},
["inch"] = {
target = "in",
},
["light-year"] = {
target = "ly",
},
["meter"] = {
target = "m",
sp_us = true,
},
["meters"] = {
target = "m",
sp_us = true,
},
["metre"] = {
target = "m",
},
["metres"] = {
target = "m",
},
["micrometre"] = {
target = "μm",
},
["micron"] = {
target = "μm",
default = "μin",
},
["mile"] = {
target = "mi",
},
["miles"] = {
target = "mi",
},
["parsec"] = {
target = "pc",
},
["rod"] = {
target = "rd",
},
["smoot"] = {
target = "sm",
},
["uin"] = {
target = "μin",
},
["yard"] = {
target = "yd",
},
["yards"] = {
target = "yd",
},
["yds"] = {
target = "yd",
},
["dtex"] = {
name1 = "decitex",
name2 = "decitex",
symbol = "dtex",
utype = "linear density",
scale = 1e-7,
default = "lb/yd",
link = "Units of textile measurement#Units",
},
["kg/cm"] = {
name1 = "kilogram per centimetre",
name1_us = "kilogram per centimeter",
name2 = "kilograms per centimetre",
name2_us = "kilograms per centimeter",
symbol = "kg/cm",
utype = "linear density",
scale = 100,
default = "lb/yd",
link = "Linear density",
},
["kg/m"] = {
name1 = "kilogram per metre",
name1_us = "kilogram per meter",
name2 = "kilograms per metre",
name2_us = "kilograms per meter",
symbol = "kg/m",
utype = "linear density",
scale = 1,
default = "lb/yd",
link = "Linear density",
},
["lb/ft"] = {
name1 = "pound per foot",
name2 = "pounds per foot",
symbol = "lb/ft",
utype = "linear density",
scale = 1.4881639435695539,
default = "kg/m",
link = "Linear density",
},
["lb/yd"] = {
name1 = "pound per yard",
name2 = "pounds per yard",
symbol = "lb/yd",
utype = "linear density",
scale = 0.49605464785651798,
default = "kg/m",
link = "Linear density",
},
["G"] = {
_name1 = "gauss",
_name2 = "gauss",
_symbol = "G",
utype = "magnetic field strength",
scale = 0.0001,
prefixes = 1,
default = "T",
link = "Gauss (unit)",
},
["T"] = {
_name1 = "tesla",
_symbol = "T",
utype = "magnetic field strength",
scale = 1,
prefixes = 1,
default = "G",
link = "Tesla (unit)",
},
["A/m"] = {
name1 = "ampere per metre",
name1_us = "ampere per meter",
name2 = "amperes per metre",
name2_us = "amperes per meter",
symbol = "A/m",
utype = "magnetizing field",
scale = 1,
default = "Oe",
},
["kA/m"] = {
name1 = "kiloampere per metre",
name1_us = "kiloampere per meter",
name2 = "kiloamperes per metre",
name2_us = "kiloamperes per meter",
symbol = "kA/m",
utype = "magnetizing field",
scale = 1000,
default = "kOe",
link = "Ampere per metre",
},
["MA/m"] = {
name1 = "megaampere per metre",
name1_us = "megaampere per meter",
name2 = "megaamperes per metre",
name2_us = "megaamperes per meter",
symbol = "MA/m",
utype = "magnetizing field",
scale = 1e6,
default = "kOe",
link = "Ampere per metre",
},
["Oe"] = {
_name1 = "oersted",
_symbol = "Oe",
utype = "magnetizing field",
scale = 79.5774715,
prefixes = 1,
default = "kA/m",
link = "Oersted",
},
["-Lcwt"] = {
name1 = "hundredweight",
name2 = "hundredweight",
symbol = "cwt",
utype = "mass",
scale = 50.80234544,
default = "lb",
},
["-Scwt"] = {
name1 = "hundredweight",
name2 = "hundredweight",
symbol = "cwt",
utype = "mass",
scale = 45.359237,
default = "lb",
},
["-ST"] = {
name1 = "short ton",
symbol = "ST",
utype = "mass",
scale = 907.18474,
default = "t",
},
["carat"] = {
symbol = "carat",
usename = 1,
utype = "mass",
scale = 0.0002,
default = "g",
link = "Carat (mass)",
},
["drachm"] = {
name1_us = "dram",
symbol = "drachm",
usename = 1,
utype = "mass",
scale = 0.001771845195,
default = "g",
link = "Dram (unit)",
},
["dram"] = {
target = "drachm",
},
["dwt"] = {
name1 = "pennyweight",
symbol = "dwt",
utype = "mass",
scale = 0.00155517384,
default = "oz g",
},
["DWton"] = {
symbol = "deadweight ton",
usename = 1,
utype = "mass",
scale = 1016.0469088,
default = "DWtonne",
link = "Deadweight tonnage",
},
["DWtonne"] = {
symbol = "deadweight tonne",
usename = 1,
utype = "mass",
scale = 1000,
default = "DWton",
link = "Deadweight tonnage",
},
["g"] = {
_name1 = "gram",
_symbol = "g",
utype = "mass",
scale = 0.001,
prefixes = 1,
default = "oz",
link = "Gram",
},
["gr"] = {
name1 = "grain",
symbol = "gr",
utype = "mass",
scale = 0.00006479891,
default = "g",
link = "Grain (unit)",
},
["Gt"] = {
name1 = "gigatonne",
symbol = "Gt",
utype = "mass",
scale = 1000000000000,
default = "LT ST",
link = "Tonne",
},
["impgalh2o"] = {
name1 = "imperial gallon of water",
name2 = "imperial gallons of water",
symbol = "imp gal H<sub>2</sub>O",
utype = "mass",
scale = 4.5359236999999499,
default = "lb kg",
link = "Imperial gallon",
},
["kt"] = {
name1 = "kilotonne",
symbol = "kt",
utype = "mass",
scale = 1000000,
default = "LT ST",
link = "Tonne",
},
["lb"] = {
name1 = "pound",
symbol = "lb",
utype = "mass",
scale = 0.45359237,
exception= "integer_more_precision",
default = "kg",
subdivs = { ["oz"] = { 16, default = "kg" } },
link = "Pound (mass)",
},
["Lcwt"] = {
name1 = "long hundredweight",
name2 = "long hundredweight",
symbol = "Lcwt",
usename = 1,
utype = "mass",
scale = 50.80234544,
default = "lb",
subdivs = { ["qtr"] = { 4, default = "kg" }, ["st"] = { 8, default = "kg" } },
link = "Hundredweight",
},
["long cwt"] = {
name1 = "long hundredweight",
name2 = "long hundredweight",
symbol = "long cwt",
utype = "mass",
scale = 50.80234544,
default = "lb kg",
subdivs = { ["qtr"] = { 4, default = "kg" } },
link = "Hundredweight",
},
["long qtr"] = {
name1 = "long quarter",
symbol = "long qtr",
utype = "mass",
scale = 12.70058636,
default = "lb kg",
},
["LT"] = {
symbol = "long ton",
usename = 1,
utype = "mass",
scale = 1016.0469088,
default = "t",
subdivs = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },
},
["lt"] = {
name1 = "long ton",
symbol = "LT",
utype = "mass",
scale = 1016.0469088,
default = "t",
subdivs = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },
},
["metric ton"] = {
symbol = "metric ton",
usename = 1,
utype = "mass",
scale = 1000,
default = "long ton",
link = "Tonne",
},
["MT"] = {
name1 = "metric ton",
symbol = "t",
utype = "mass",
scale = 1000,
default = "LT ST",
link = "Tonne",
},
["Mt"] = {
name1 = "megatonne",
symbol = "Mt",
utype = "mass",
scale = 1000000000,
default = "LT ST",
link = "Tonne",
},
["oz"] = {
name1 = "ounce",
symbol = "oz",
utype = "mass",
scale = 0.028349523125,
default = "g",
},
["ozt"] = {
name1 = "troy ounce",
symbol = "ozt",
utype = "mass",
scale = 0.0311034768,
default = "oz g",
},
["pdr"] = {
name1 = "pounder",
symbol = "pdr",
utype = "mass",
scale = 0.45359237,
default = "kg",
link = "Pound (mass)",
},
["qtr"] = {
name1 = "quarter",
symbol = "qtr",
utype = "mass",
scale = 12.70058636,
default = "lb kg",
subdivs = { ["lb"] = { 28, default = "kg" } },
link = "Long quarter",
},
["Scwt"] = {
name1 = "short hundredweight",
name2 = "short hundredweight",
symbol = "Scwt",
usename = 1,
utype = "mass",
scale = 45.359237,
default = "lb",
link = "Hundredweight",
},
["short cwt"] = {
name1 = "short hundredweight",
name2 = "short hundredweight",
symbol = "short cwt",
utype = "mass",
scale = 45.359237,
default = "lb kg",
link = "Hundredweight",
},
["short qtr"] = {
name1 = "short quarter",
symbol = "short qtr",
utype = "mass",
scale = 11.33980925,
default = "lb kg",
},
["ST"] = {
symbol = "short ton",
usename = 1,
utype = "mass",
scale = 907.18474,
default = "t",
subdivs = { ["Scwt"] = { 20, default = "t", unit = "-Scwt" } },
},
["shtn"] = {
name1 = "short ton",
symbol = "sh tn",
utype = "mass",
scale = 907.18474,
default = "t",
},
["shton"] = {
symbol = "ton",
usename = 1,
utype = "mass",
scale = 907.18474,
default = "t",
},
["solar mass"] = {
name1 = "solar mass",
name2 = "solar masses",
symbol = "''M''<sub>☉</sub>",
utype = "mass",
scale = 1.98855e30,
default = "kg",
},
["st"] = {
name1 = "stone",
name2 = "stone",
symbol = "st",
utype = "mass",
scale = 6.35029318,
default = "lb kg",
subdivs = { ["lb"] = { 14, default = "kg lb" } },
link = "Stone (unit)",
},
["t"] = {
name1 = "tonne",
name1_us = "metric ton",
symbol = "t",
utype = "mass",
scale = 1000,
default = "LT ST",
},
["tonne"] = {
name1 = "tonne",
name1_us = "metric ton",
symbol = "t",
utype = "mass",
scale = 1000,
default = "shton",
},
["troy pound"] = {
symbol = "troy pound",
usename = 1,
utype = "mass",
scale = 0.3732417216,
default = "lb kg",
link = "Troy weight",
},
["usgalh2o"] = {
name1 = "US gallon of water",
name1_us = "U.S. gallon of water",
name2 = "US gallons of water",
name2_us = "U.S. gallons of water",
symbol = "US gal H<sub>2</sub>O",
utype = "mass",
scale = 3.7776215836051126,
default = "lb kg",
link = "United States customary units#Fluid volume",
},
["viss"] = {
name2 = "viss",
symbol = "viss",
utype = "mass",
scale = 1.632932532,
default = "kg",
link = "Myanmar units of measurement#Mass",
},
["billion tonne"] = {
target = "e9t",
},
["kilogram"] = {
target = "kg",
},
["kilotonne"] = {
target = "kt",
},
["lbs"] = {
target = "lb",
},
["lbt"] = {
target = "troy pound",
},
["lcwt"] = {
target = "Lcwt",
},
["long ton"] = {
target = "LT",
},
["mcg"] = {
target = "μg",
},
["million tonne"] = {
target = "e6t",
},
["scwt"] = {
target = "Scwt",
},
["short ton"] = {
target = "ST",
},
["stone"] = {
target = "st",
},
["thousand tonne"] = {
target = "e3t",
},
["tonnes"] = {
target = "t",
},
["kg/kW"] = {
name1 = "kilogram per kilowatt",
name2 = "kilograms per kilowatt",
symbol = "kg/kW",
utype = "mass per unit power",
scale = 0.001,
default = "lb/hp",
link = "Kilowatt",
},
["lb/hp"] = {
name1 = "pound per horsepower",
name2 = "pounds per horsepower",
symbol = "lb/hp",
utype = "mass per unit power",
scale = 0.00060827738784176115,
default = "kg/kW",
link = "Horsepower",
},
["kg/h"] = {
per = { "kg", "h" },
utype = "mass per unit time",
default = "lb/h",
},
["lb/h"] = {
per = { "lb", "h" },
utype = "mass per unit time",
default = "kg/h",
},
["g-mol/d"] = {
name1 = "gram-mole per day",
name2 = "gram-moles per day",
symbol = "g‑mol/d",
utype = "molar rate",
scale = 1.1574074074074073e-5,
default = "μmol/s",
link = "Mole (unit)",
},
["g-mol/h"] = {
name1 = "gram-mole per hour",
name2 = "gram-moles per hour",
symbol = "g‑mol/h",
utype = "molar rate",
scale = 0.00027777777777777778,
default = "mmol/s",
link = "Mole (unit)",
},
["g-mol/min"] = {
name1 = "gram-mole per minute",
name2 = "gram-moles per minute",
symbol = "g‑mol/min",
utype = "molar rate",
scale = 0.016666666666666666,
default = "g-mol/s",
link = "Mole (unit)",
},
["g-mol/s"] = {
name1 = "gram-mole per second",
name2 = "gram-moles per second",
symbol = "g‑mol/s",
utype = "molar rate",
scale = 1,
default = "lb-mol/min",
link = "Mole (unit)",
},
["gmol/d"] = {
name1 = "gram-mole per day",
name2 = "gram-moles per day",
symbol = "gmol/d",
utype = "molar rate",
scale = 1.1574074074074073e-5,
default = "μmol/s",
link = "Mole (unit)",
},
["gmol/h"] = {
name1 = "gram-mole per hour",
name2 = "gram-moles per hour",
symbol = "gmol/h",
utype = "molar rate",
scale = 0.00027777777777777778,
default = "mmol/s",
link = "Mole (unit)",
},
["gmol/min"] = {
name1 = "gram-mole per minute",
name2 = "gram-moles per minute",
symbol = "gmol/min",
utype = "molar rate",
scale = 0.016666666666666666,
default = "gmol/s",
link = "Mole (unit)",
},
["gmol/s"] = {
name1 = "gram-mole per second",
name2 = "gram-moles per second",
symbol = "gmol/s",
utype = "molar rate",
scale = 1,
default = "lbmol/min",
link = "Mole (unit)",
},
["kmol/d"] = {
name1 = "kilomole per day",
name2 = "kilomoles per day",
symbol = "kmol/d",
utype = "molar rate",
scale = 0.011574074074074073,
default = "mmol/s",
link = "Mole (unit)",
},
["kmol/h"] = {
name1 = "kilomole per hour",
name2 = "kilomoles per hour",
symbol = "kmol/h",
utype = "molar rate",
scale = 0.27777777777777779,
default = "mol/s",
link = "Mole (unit)",
},
["kmol/min"] = {
name1 = "kilomole per minute",
name2 = "kilomoles per minute",
symbol = "kmol/min",
utype = "molar rate",
scale = 16.666666666666668,
default = "mol/s",
link = "Kilomole (unit)",
},
["kmol/s"] = {
name1 = "kilomole per second",
name2 = "kilomoles per second",
symbol = "kmol/s",
utype = "molar rate",
scale = 1000,
default = "lb-mol/s",
link = "Mole (unit)",
},
["lb-mol/d"] = {
name1 = "pound-mole per day",
name2 = "pound-moles per day",
symbol = "lb‑mol/d",
utype = "molar rate",
scale = 0.0052499116898148141,
default = "mmol/s",
link = "Pound-mole",
},
["lb-mol/h"] = {
name1 = "pound-mole per hour",
name2 = "pound-moles per hour",
symbol = "lb‑mol/h",
utype = "molar rate",
scale = 0.12599788055555555,
default = "mol/s",
link = "Pound-mole",
},
["lb-mol/min"] = {
name1 = "pound-mole per minute",
name2 = "pound-moles per minute",
symbol = "lb‑mol/min",
utype = "molar rate",
scale = 7.5598728333333334,
default = "mol/s",
link = "Pound-mole",
},
["lb-mol/s"] = {
name1 = "pound-mole per second",
name2 = "pound-moles per second",
symbol = "lb‑mol/s",
utype = "molar rate",
scale = 453.59237,
default = "kmol/s",
link = "Pound-mole",
},
["lbmol/d"] = {
name1 = "pound-mole per day",
name2 = "pound-moles per day",
symbol = "lbmol/d",
utype = "molar rate",
scale = 0.0052499116898148141,
default = "mmol/s",
link = "Pound-mole",
},
["lbmol/h"] = {
name1 = "pound-mole per hour",
name2 = "pound-moles per hour",
symbol = "lbmol/h",
utype = "molar rate",
scale = 0.12599788055555555,
default = "mol/s",
link = "Pound-mole",
},
["lbmol/min"] = {
name1 = "pound-mole per minute",
name2 = "pound-moles per minute",
symbol = "lbmol/min",
utype = "molar rate",
scale = 7.5598728333333334,
default = "mol/s",
link = "Pound-mole",
},
["lbmol/s"] = {
name1 = "pound-mole per second",
name2 = "pound-moles per second",
symbol = "lbmol/s",
utype = "molar rate",
scale = 453.59237,
default = "kmol/s",
link = "Pound-mole",
},
["mmol/s"] = {
name1 = "millimole per second",
name2 = "millimoles per second",
symbol = "mmol/s",
utype = "molar rate",
scale = 0.001,
default = "lb-mol/d",
link = "Mole (unit)",
},
["mol/d"] = {
name1 = "mole per day",
name2 = "moles per day",
symbol = "mol/d",
utype = "molar rate",
scale = 1.1574074074074073e-5,
default = "μmol/s",
link = "Mole (unit)",
},
["mol/h"] = {
name1 = "mole per hour",
name2 = "moles per hour",
symbol = "mol/h",
utype = "molar rate",
scale = 0.00027777777777777778,
default = "mmol/s",
link = "Mole (unit)",
},
["mol/min"] = {
name1 = "mole per minute",
name2 = "moles per minute",
symbol = "mol/min",
utype = "molar rate",
scale = 0.016666666666666666,
default = "mol/s",
link = "Mole (unit)",
},
["mol/s"] = {
name1 = "mole per second",
name2 = "moles per second",
symbol = "mol/s",
utype = "molar rate",
scale = 1,
default = "lb-mol/min",
link = "Mole (unit)",
},
["μmol/s"] = {
name1 = "micromole per second",
name2 = "micromoles per second",
symbol = "μmol/s",
utype = "molar rate",
scale = 0.000001,
default = "lb-mol/d",
link = "Mole (unit)",
},
["umol/s"] = {
target = "μmol/s",
},
["/acre"] = {
name1 = "per acre",
name2 = "per acre",
symbol = "/acre",
utype = "per unit area",
scale = 0.00024710538146716532,
default = "/ha",
link = "Acre",
},
["/ha"] = {
name1 = "per hectare",
name2 = "per hectare",
symbol = "/ha",
utype = "per unit area",
scale = 100e-6,
default = "/acre",
link = "Hectare",
},
["/sqcm"] = {
name1 = "per square centimetre",
name1_us = "per square centimeter",
name2 = "per square centimetre",
name2_us = "per square centimeter",
symbol = "/cm<sup>2</sup>",
utype = "per unit area",
scale = 1e4,
default = "/sqin",
link = "Square centimetre",
},
["/sqin"] = {
name1 = "per square inch",
name2 = "per square inch",
symbol = "/in<sup>2</sup>",
utype = "per unit area",
scale = 1550.0031000062002,
default = "/sqcm",
link = "Square inch",
},
["/sqkm"] = {
name1 = "per square kilometre",
name1_us = "per square kilometer",
name2 = "per square kilometre",
name2_us = "per square kilometer",
symbol = "/km<sup>2</sup>",
utype = "per unit area",
scale = 1e-6,
default = "/sqmi",
link = "Square kilometre",
},
["/sqmi"] = {
name1 = "per square mile",
name2 = "per square mile",
symbol = "/sq mi",
utype = "per unit area",
scale = 3.8610215854244582e-7,
default = "/sqkm",
link = "Square mile",
},
["PD/acre"] = {
name1 = "inhabitant per acre",
name2 = "inhabitants per acre",
symbol = "/acre",
utype = "per unit area",
scale = 0.00024710538146716532,
default = "PD/ha",
link = "Acre",
},
["PD/ha"] = {
name1 = "inhabitant per hectare",
name2 = "inhabitants per hectare",
symbol = "/ha",
utype = "per unit area",
scale = 100e-6,
default = "PD/acre",
link = "Hectare",
},
["PD/sqkm"] = {
name1 = "inhabitant per square kilometre",
name1_us = "inhabitant per square kilometer",
name2 = "inhabitants per square kilometre",
name2_us = "inhabitants per square kilometer",
symbol = "/km<sup>2</sup>",
utype = "per unit area",
scale = 1e-6,
default = "PD/sqmi",
link = "Square kilometre",
},
["PD/sqmi"] = {
name1 = "inhabitant per square mile",
name2 = "inhabitants per square mile",
symbol = "/sq mi",
utype = "per unit area",
scale = 3.8610215854244582e-7,
default = "PD/sqkm",
link = "Square mile",
},
["/cm2"] = {
target = "/sqcm",
},
["/in2"] = {
target = "/sqin",
},
["/km2"] = {
target = "/sqkm",
},
["pd/acre"] = {
target = "PD/acre",
},
["pd/ha"] = {
target = "PD/ha",
},
["PD/km2"] = {
target = "PD/sqkm",
},
["pd/km2"] = {
target = "PD/sqkm",
},
["PD/km²"] = {
target = "PD/sqkm",
},
["pd/sqkm"] = {
target = "PD/sqkm",
},
["pd/sqmi"] = {
target = "PD/sqmi",
},
["/l"] = {
name1 = "per litre",
name1_us = "per liter",
name2 = "per litre",
name2_us = "per liter",
symbol = "/l",
utype = "per unit volume",
scale = 1000,
default = "/usgal",
link = "Litre",
},
["/USgal"] = {
name1 = "per gallon",
name2 = "per gallon",
symbol = "/gal",
utype = "per unit volume",
scale = 264.172052,
default = "/l",
link = "US gallon",
customary= 2,
},
["/usgal"] = {
target = "/USgal",
},
["bhp"] = {
name1 = "brake horsepower",
name2 = "brake horsepower",
symbol = "bhp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
link = "Horsepower#Brake horsepower",
},
["Cal/d"] = {
name1 = "large calorie per day",
name2 = "large calories per day",
symbol = "Cal/d",
utype = "power",
scale = 0.048425925925925928,
default = "kJ/d",
link = "Calorie",
},
["Cal/h"] = {
name1 = "large calorie per hour",
name2 = "large calories per hour",
symbol = "Cal/h",
utype = "power",
scale = 1.1622222222222223,
default = "kJ/h",
link = "Calorie",
},
["cal/h"] = {
name1 = "calorie per hour",
name2 = "calories per hour",
symbol = "cal/h",
utype = "power",
scale = 0.0011622222222222223,
default = "W",
link = "Calorie",
},
["CV"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "CV",
utype = "power",
scale = 735.49875,
default = "kW",
},
["hk"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "hk",
utype = "power",
scale = 735.49875,
default = "kW",
},
["hp"] = {
name1 = "horsepower",
name2 = "horsepower",
symbol = "hp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
},
["hp-electric"] = {
name1 = "electric horsepower",
name2 = "electric horsepower",
symbol = "hp",
utype = "power",
scale = 746,
default = "kW",
link = "Horsepower#Electrical horsepower",
},
["hp-electrical"] = {
name1 = "electrical horsepower",
name2 = "electrical horsepower",
symbol = "hp",
utype = "power",
scale = 746,
default = "kW",
link = "Horsepower#Electrical horsepower",
},
["hp-metric"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "hp",
utype = "power",
scale = 735.49875,
default = "kW",
},
["ihp"] = {
name1 = "indicated horsepower",
name2 = "indicated horsepower",
symbol = "ihp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
link = "Horsepower#Indicated horsepower",
},
["kcal/h"] = {
name1 = "kilocalorie per hour",
name2 = "kilocalories per hour",
symbol = "kcal/h",
utype = "power",
scale = 1.1622222222222223,
default = "kW",
link = "Calorie",
},
["kJ/d"] = {
name1 = "kilojoule per day",
name2 = "kilojoules per day",
symbol = "kJ/d",
utype = "power",
scale = 0.011574074074074073,
default = "Cal/d",
link = "Kilojoule",
},
["kJ/h"] = {
name1 = "kilojoule per hour",
name2 = "kilojoules per hour",
symbol = "kJ/h",
utype = "power",
scale = 0.27777777777777779,
default = "W",
link = "Kilojoule",
},
["PS"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "PS",
utype = "power",
scale = 735.49875,
default = "kW",
},
["shp"] = {
name1 = "shaft horsepower",
name2 = "shaft horsepower",
symbol = "shp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
link = "Horsepower#Shaft horsepower",
},
["W"] = {
_name1 = "watt",
_symbol = "W",
utype = "power",
scale = 1,
prefixes = 1,
default = "hp",
link = "Watt",
},
["BTU/h"] = {
per = { "BTU", "h" },
utype = "power",
default = "W",
},
["Btu/h"] = {
per = { "Btu", "h" },
utype = "power",
default = "W",
},
["BHP"] = {
target = "bhp",
},
["btu/h"] = {
target = "BTU/h",
},
["HP"] = {
target = "hp",
},
["Hp"] = {
target = "hp",
},
["hp-mechanical"] = {
target = "hp",
},
["IHP"] = {
target = "ihp",
},
["SHP"] = {
target = "shp",
},
["whp"] = {
target = "hp",
},
["hp/lb"] = {
name1 = "horsepower per pound",
name2 = "horsepower per pound",
symbol = "hp/lb",
utype = "power per unit mass",
scale = 1643.986806,
default = "kW/kg",
link = "Power-to-weight ratio",
},
["hp/LT"] = {
name1 = "horsepower per long ton",
name2 = "horsepower per long ton",
symbol = "hp/LT",
utype = "power per unit mass",
scale = 0.73392268125000004,
default = "kW/t",
link = "Power-to-weight ratio",
},
["hp/ST"] = {
name1 = "horsepower per short ton",
name2 = "horsepower per short ton",
symbol = "hp/ST",
utype = "power per unit mass",
scale = 0.821993403,
default = "kW/t",
link = "Power-to-weight ratio",
},
["hp/t"] = {
name1 = "horsepower per tonne",
name2 = "horsepower per tonne",
symbol = "hp/t",
utype = "power per unit mass",
scale = 0.74569987158227022,
default = "kW/t",
link = "Power-to-weight ratio",
},
["kW/kg"] = {
name1 = "kilowatt per kilogram",
name2 = "kilowatts per kilogram",
symbol = "kW/kg",
utype = "power per unit mass",
scale = 1000,
default = "hp/lb",
link = "Power-to-weight ratio",
},
["kW/t"] = {
name1 = "kilowatt per tonne",
name2 = "kilowatts per tonne",
symbol = "kW/t",
utype = "power per unit mass",
scale = 1,
default = "PS/t",
link = "Power-to-weight ratio",
},
["PS/t"] = {
name1 = "metric horsepower per tonne",
name2 = "metric horsepower per tonne",
symbol = "PS/t",
utype = "power per unit mass",
scale = 0.73549875,
default = "kW/t",
link = "Power-to-weight ratio",
},
["shp/lb"] = {
name1 = "shaft horsepower per pound",
name2 = "shaft horsepower per pound",
symbol = "shp/lb",
utype = "power per unit mass",
scale = 1643.986806,
default = "kW/kg",
link = "Power-to-weight ratio",
},
["hp/tonne"] = {
target = "hp/t",
symbol = "hp/tonne",
default = "kW/tonne",
},
["kW/tonne"] = {
target = "kW/t",
symbol = "kW/tonne",
},
["-lb/in2"] = {
name1 = "pound per square inch",
name2 = "pounds per square inch",
symbol = "lb/in<sup>2</sup>",
utype = "pressure",
scale = 6894.7572931683608,
default = "kPa kgf/cm2",
},
["atm"] = {
name1 = "standard atmosphere",
symbol = "atm",
utype = "pressure",
scale = 101325,
default = "kPa",
link = "Atmosphere (unit)",
},
["Ba"] = {
name1 = "barye",
symbol = "Ba",
utype = "pressure",
scale = 0.1,
default = "Pa",
},
["bar"] = {
symbol = "bar",
utype = "pressure",
scale = 100000,
default = "kPa",
link = "Bar (unit)",
},
["dbar"] = {
name1 = "decibar",
symbol = "dbar",
utype = "pressure",
scale = 10000,
default = "kPa",
link = "Bar (unit)",
},
["inHg"] = {
name1 = "inch of mercury",
name2 = "inches of mercury",
symbol = "inHg",
utype = "pressure",
scale = 3386.388640341,
default = "kPa",
},
["kBa"] = {
name1 = "kilobarye",
symbol = "kBa",
utype = "pressure",
scale = 100,
default = "hPa",
link = "Barye",
},
["kg-f/cm2"] = {
name1 = "kilogram-force per square centimetre",
name1_us = "kilogram-force per square centimeter",
name2 = "kilograms-force per square centimetre",
name2_us = "kilograms-force per square centimeter",
symbol = "kg<sub>f</sub>/cm<sup>2</sup>",
utype = "pressure",
scale = 98066.5,
default = "psi",
link = "Kilogram-force",
},
["kg/cm2"] = {
name1 = "kilogram per square centimetre",
name1_us = "kilogram per square centimeter",
name2 = "kilograms per square centimetre",
name2_us = "kilograms per square centimeter",
symbol = "kg/cm<sup>2</sup>",
utype = "pressure",
scale = 98066.5,
default = "psi",
link = "Kilogram-force",
},
["kgf/cm2"] = {
name1 = "kilogram-force per square centimetre",
name1_us = "kilogram-force per square centimeter",
name2 = "kilograms-force per square centimetre",
name2_us = "kilograms-force per square centimeter",
symbol = "kgf/cm<sup>2</sup>",
utype = "pressure",
scale = 98066.5,
default = "psi",
link = "Kilogram-force",
},
["ksi"] = {
name1 = "kilopound per square inch",
name2 = "kilopounds per square inch",
symbol = "ksi",
utype = "pressure",
scale = 6894757.2931683613,
default = "MPa",
link = "Pound per square inch",
},
["lbf/in2"] = {
name1 = "pound-force per square inch",
name2 = "pounds-force per square inch",
symbol = "lbf/in<sup>2</sup>",
utype = "pressure",
scale = 6894.7572931683608,
default = "kPa kgf/cm2",
},
["mb"] = {
name1 = "millibar",
symbol = "mb",
utype = "pressure",
scale = 100,
default = "hPa",
link = "Bar (unit)",
},
["mbar"] = {
name1 = "millibar",
symbol = "mbar",
utype = "pressure",
scale = 100,
default = "hPa",
link = "Bar (unit)",
},
["mmHg"] = {
name1 = "millimetre of mercury",
name1_us = "millimeter of mercury",
name2 = "millimetres of mercury",
name2_us = "millimeters of mercury",
symbol = "mmHg",
utype = "pressure",
scale = 133.322387415,
default = "kPa",
},
["Pa"] = {
_name1 = "pascal",
_symbol = "Pa",
utype = "pressure",
scale = 1,
prefixes = 1,
default = "psi",
link = "Pascal (unit)",
},
["psf"] = {
name1 = "pound per square foot",
name2 = "pounds per square foot",
symbol = "psf",
utype = "pressure",
scale = 47.880258980335839,
default = "kPa",
link = "Pound per square inch",
},
["psi"] = {
name1 = "pound per square inch",
name2 = "pounds per square inch",
symbol = "psi",
utype = "pressure",
scale = 6894.7572931683608,
default = "kPa",
},
["Torr"] = {
name1 = "torr",
symbol = "Torr",
utype = "pressure",
scale = 133.32236842105263,
default = "kPa",
},
["N/cm2"] = {
per = { "N", "cm2" },
utype = "pressure",
default = "psi",
},
["N/m2"] = {
per = { "N", "m2" },
utype = "pressure",
default = "psi",
},
["g/cm2"] = {
per = { "g", "cm2" },
utype = "pressure",
default = "lb/sqft",
multiplier= 9.80665,
},
["g/m2"] = {
per = { "g", "m2" },
utype = "pressure",
default = "lb/sqft",
multiplier= 9.80665,
},
["kg/ha"] = {
per = { "kg", "ha" },
utype = "pressure",
default = "lb/acre",
multiplier= 9.80665,
},
["kg/m2"] = {
per = { "kg", "m2" },
utype = "pressure",
default = "lb/sqft",
multiplier= 9.80665,
},
["lb/1000sqft"] = {
per = { "lb", "1000sqft" },
utype = "pressure",
default = "g/m2",
multiplier= 9.80665,
},
["lb/acre"] = {
per = { "lb", "acre" },
utype = "pressure",
default = "kg/ha",
multiplier= 9.80665,
},
["lb/sqft"] = {
per = { "lb", "sqft" },
utype = "pressure",
default = "kg/m2",
multiplier= 9.80665,
},
["lb/sqyd"] = {
per = { "lb", "sqyd" },
utype = "pressure",
default = "kg/m2",
multiplier= 9.80665,
},
["LT/acre"] = {
per = { "LT", "acre" },
utype = "pressure",
default = "t/ha",
multiplier= 9.80665,
},
["MT/ha"] = {
per = { "MT", "ha" },
utype = "pressure",
default = "LT/acre ST/acre",
multiplier= 9.80665,
},
["oz/sqft"] = {
per = { "oz", "sqft" },
utype = "pressure",
default = "g/m2",
multiplier= 9.80665,
},
["oz/sqyd"] = {
per = { "oz", "sqyd" },
utype = "pressure",
default = "g/m2",
multiplier= 9.80665,
},
["ST/acre"] = {
per = { "ST", "acre" },
utype = "pressure",
default = "t/ha",
multiplier= 9.80665,
},
["t/ha"] = {
per = { "t", "ha" },
utype = "pressure",
default = "LT/acre ST/acre",
multiplier= 9.80665,
},
["tonne/acre"] = {
per = { "tonne", "acre" },
utype = "pressure",
default = "tonne/ha",
multiplier= 9.80665,
},
["tonne/ha"] = {
per = { "tonne", "ha" },
utype = "pressure",
default = "tonne/acre",
multiplier= 9.80665,
},
["kgfpsqcm"] = {
target = "kgf/cm2",
},
["kgpsqcm"] = {
target = "kg/cm2",
},
["kN/m2"] = {
target = "kPa",
},
["lb/in2"] = {
target = "lbf/in2",
},
["torr"] = {
target = "Torr",
},
["Bq"] = {
_name1 = "becquerel",
_symbol = "Bq",
utype = "radioactivity",
scale = 1,
prefixes = 1,
default = "pCi",
link = "Becquerel",
},
["Ci"] = {
_name1 = "curie",
_symbol = "Ci",
utype = "radioactivity",
scale = 3.7e10,
prefixes = 1,
default = "GBq",
link = "Curie (unit)",
},
["Rd"] = {
_name1 = "rutherford",
_symbol = "Rd",
utype = "radioactivity",
scale = 1e6,
prefixes = 1,
default = "MBq",
link = "Rutherford (unit)",
},
["cm/h"] = {
name1 = "centimetre per hour",
name1_us = "centimeter per hour",
name2 = "centimetres per hour",
name2_us = "centimeters per hour",
symbol = "cm/h",
utype = "speed",
scale = 2.7777777777777775e-6,
default = "in/h",
link = "Metre per second",
},
["cm/s"] = {
name1 = "centimetre per second",
name1_us = "centimeter per second",
name2 = "centimetres per second",
name2_us = "centimeters per second",
symbol = "cm/s",
utype = "speed",
scale = 0.01,
default = "in/s",
link = "Metre per second",
},
["cm/year"] = {
name1 = "centimetre per year",
name1_us = "centimeter per year",
name2 = "centimetres per year",
name2_us = "centimeters per year",
symbol = "cm/year",
utype = "speed",
scale = 3.168873850681143e-10,
default = "in/year",
link = "Orders of magnitude (speed)",
},
["foot/s"] = {
name1 = "foot per second",
name2 = "foot per second",
symbol = "ft/s",
utype = "speed",
scale = 0.3048,
default = "m/s",
},
["ft/min"] = {
name1 = "foot per minute",
name2 = "feet per minute",
symbol = "ft/min",
utype = "speed",
scale = 0.00508,
default = "m/min",
link = "Feet per second",
},
["ft/s"] = {
name1 = "foot per second",
name2 = "feet per second",
symbol = "ft/s",
utype = "speed",
scale = 0.3048,
default = "m/s",
link = "Feet per second",
},
["furlong per fortnight"] = {
name2 = "furlongs per fortnight",
symbol = "furlong per fortnight",
usename = 1,
utype = "speed",
scale = 0.00016630952380952381,
default = "km/h mph",
link = "FFF system",
},
["in/h"] = {
name1 = "inch per hour",
name2 = "inches per hour",
symbol = "in/h",
utype = "speed",
scale = 7.0555555555555559e-6,
default = "cm/h",
link = "Inch",
},
["in/s"] = {
name1 = "inch per second",
name2 = "inches per second",
symbol = "in/s",
utype = "speed",
scale = 0.0254,
default = "cm/s",
link = "Inch",
},
["in/year"] = {
name1 = "inch per year",
name2 = "inches per year",
symbol = "in/year",
utype = "speed",
scale = 8.0489395807301024e-10,
default = "cm/year",
link = "Orders of magnitude (speed)",
},
["isp"] = {
name1 = "second",
symbol = "s",
utype = "speed",
scale = 9.80665,
default = "km/s",
link = "Specific impulse",
},
["km/d"] = {
name1 = "kilometre per day",
name1_us = "kilometer per day",
name2 = "kilometres per day",
name2_us = "kilometers per day",
symbol = "km/d",
utype = "speed",
scale = 1.1574074074074074e-2,
default = "mi/d",
link = "Orders of magnitude (speed)",
},
["km/h"] = {
name1 = "kilometre per hour",
name1_us = "kilometer per hour",
name2 = "kilometres per hour",
name2_us = "kilometers per hour",
symbol = "km/h",
utype = "speed",
scale = 0.27777777777777779,
default = "mph",
link = "Kilometres per hour",
},
["km/s"] = {
name1 = "kilometre per second",
name1_us = "kilometer per second",
name2 = "kilometres per second",
name2_us = "kilometers per second",
symbol = "km/s",
utype = "speed",
scale = 1000,
default = "mi/s",
link = "Metre per second",
},
["kn"] = {
name1 = "knot",
symbol = "kn",
utype = "speed",
scale = 0.51444444444444448,
default = "km/h mph",
link = "Knot (unit)",
},
["kNs/kg"] = {
name2 = "kN‑s/kg",
symbol = "kN‑s/kg",
utype = "speed",
scale = 1000,
default = "isp",
link = "Specific impulse",
},
["m/min"] = {
name1 = "metre per minute",
name1_us = "meter per minute",
name2 = "metres per minute",
name2_us = "meters per minute",
symbol = "m/min",
utype = "speed",
scale = 0.016666666666666666,
default = "ft/min",
link = "Metre per second",
},
["m/s"] = {
name1 = "metre per second",
name1_us = "meter per second",
name2 = "metres per second",
name2_us = "meters per second",
symbol = "m/s",
utype = "speed",
scale = 1,
default = "ft/s",
},
["Mach"] = {
name2 = "Mach",
symbol = "Mach",
utype = "speed",
builtin = "mach",
scale = 0,
iscomplex= true,
default = "km/h mph",
link = "Mach number",
},
["mi/d"] = {
name1 = "mile per day",
name2 = "miles per day",
symbol = "mi/d",
utype = "speed",
scale = 1.8626666666666667e-2,
default = "km/d",
link = "Orders of magnitude (speed)",
},
["mi/s"] = {
name1 = "mile per second",
name2 = "miles per second",
symbol = "mi/s",
utype = "speed",
scale = 1609.344,
default = "km/s",
link = "Mile",
},
["mm/h"] = {
name1 = "millimetre per hour",
name1_us = "millimeter per hour",
name2 = "millimetres per hour",
name2_us = "millimeters per hour",
symbol = "mm/h",
utype = "speed",
scale = 2.7777777777777781e-7,
default = "in/h",
link = "Metre per second",
},
["mph"] = {
name1 = "mile per hour",
name2 = "miles per hour",
symbol = "mph",
utype = "speed",
scale = 0.44704,
default = "km/h",
link = "Miles per hour",
},
["Ns/kg"] = {
name2 = "N‑s/kg",
symbol = "N‑s/kg",
utype = "speed",
scale = 1,
default = "isp",
link = "Specific impulse",
},
["si tsfc"] = {
name2 = "g/(kN⋅s)",
symbol = "g/(kN⋅s)",
utype = "speed",
scale = 9.9999628621379242e-7,
invert = -1,
iscomplex= true,
default = "tsfc",
link = "Thrust specific fuel consumption",
},
["tsfc"] = {
name2 = "lb/(lbf⋅h)",
symbol = "lb/(lbf⋅h)",
utype = "speed",
scale = 2.832545036049801e-5,
invert = -1,
iscomplex= true,
default = "si tsfc",
link = "Thrust specific fuel consumption",
},
["cm/y"] = {
target = "cm/year",
},
["cm/yr"] = {
target = "cm/year",
},
["in/y"] = {
target = "in/year",
},
["in/yr"] = {
target = "in/year",
},
["knot"] = {
target = "kn",
},
["knots"] = {
target = "kn",
},
["kph"] = {
target = "km/h",
},
["mi/h"] = {
target = "mph",
},
["mm/s"] = {
per = { "mm", "s" },
utype = "speed",
default = "in/s",
link = "Metre per second",
},
["C"] = {
name1 = "degree Celsius",
name2 = "degrees Celsius",
symbol = "°C",
usesymbol= 1,
utype = "temperature",
scale = 1,
offset = -273.15,
iscomplex= true,
istemperature= true,
default = "F",
link = "Celsius",
},
["F"] = {
name1 = "degree Fahrenheit",
name2 = "degrees Fahrenheit",
symbol = "°F",
usesymbol= 1,
utype = "temperature",
scale = 0.55555555555555558,
offset = 32-273.15*(9/5),
iscomplex= true,
istemperature= true,
default = "C",
link = "Fahrenheit",
},
["K"] = {
_name1 = "kelvin",
_symbol = "K",
usesymbol= 1,
utype = "temperature",
scale = 1,
offset = 0,
iscomplex= true,
istemperature= true,
prefixes = 1,
default = "C F",
link = "Kelvin",
},
["keVT"] = {
name1 = "kiloelectronvolt",
symbol = "keV",
utype = "temperature",
scale = 11.604505e6,
offset = 0,
iscomplex= true,
default = "MK",
link = "Electronvolt",
},
["R"] = {
name1 = "degree Rankine",
name2 = "degrees Rankine",
symbol = "°R",
usesymbol= 1,
utype = "temperature",
scale = 0.55555555555555558,
offset = 0,
iscomplex= true,
istemperature= true,
default = "K F C",
link = "Rankine scale",
},
["Celsius"] = {
target = "C",
},
["°C"] = {
target = "C",
},
["°F"] = {
target = "F",
},
["°R"] = {
target = "R",
},
["C-change"] = {
name1 = "degree Celsius change",
name2 = "degrees Celsius change",
symbol = "°C",
usesymbol= 1,
utype = "temperature change",
scale = 1,
default = "F-change",
link = "Celsius",
},
["F-change"] = {
name1 = "degree Fahrenheit change",
name2 = "degrees Fahrenheit change",
symbol = "°F",
usesymbol= 1,
utype = "temperature change",
scale = 0.55555555555555558,
default = "C-change",
link = "Fahrenheit",
},
["K-change"] = {
name1 = "kelvin change",
name2 = "kelvins change",
symbol = "K",
usesymbol= 1,
utype = "temperature change",
scale = 1,
default = "F-change",
link = "Kelvin",
},
["°C-change"] = {
target = "C-change",
},
["°F-change"] = {
target = "F-change",
},
["century"] = {
name1 = "century",
name2 = "centuries",
symbol = "ha",
utype = "time",
scale = 3155760000,
default = "Gs",
},
["d"] = {
name1 = "day",
symbol = "d",
utype = "time",
scale = 86400,
default = "ks",
},
["decade"] = {
name1 = "decade",
symbol = "daa",
utype = "time",
scale = 315576000,
default = "Ms",
},
["dog year"] = {
name1 = "dog year",
symbol = "dog yr",
utype = "time",
scale = 220903200,
default = "years",
link = "List of unusual units of measurement#Dog year",
},
["fortnight"] = {
symbol = "fortnight",
usename = 1,
utype = "time",
scale = 1209600,
default = "week",
},
["h"] = {
name1 = "hour",
symbol = "h",
utype = "time",
scale = 3600,
default = "ks",
},
["long billion year"] = {
name1 = "billion years",
name2 = "billion years",
symbol = "Ta",
utype = "time",
scale = 31557600000000000000,
default = "Es",
link = "Annum",
},
["millennium"] = {
name1 = "millennium",
name2 = "millennia",
symbol = "ka",
utype = "time",
scale = 31557600000,
default = "Gs",
},
["milliard year"] = {
name1 = "milliard years",
name2 = "milliard years",
symbol = "Ga",
utype = "time",
scale = 31557600000000000,
default = "Ps",
link = "Annum",
},
["million year"] = {
name1 = "million years",
name2 = "million years",
symbol = "Ma",
utype = "time",
scale = 31557600000000,
default = "Ts",
link = "Annum",
},
["min"] = {
name1 = "minute",
symbol = "min",
utype = "time",
scale = 60,
default = "s",
},
["month"] = {
symbol = "month",
usename = 1,
utype = "time",
scale = 2629800,
default = "Ms",
},
["months"] = {
name1 = "month",
symbol = "mo",
utype = "time",
scale = 2629800,
default = "year",
},
["s"] = {
_name1 = "second",
_symbol = "s",
utype = "time",
scale = 1,
prefixes = 1,
default = "min",
link = "Second",
},
["short billion year"] = {
name1 = "billion years",
name2 = "billion years",
symbol = "Ga",
utype = "time",
scale = 31557600000000000,
default = "Ps",
link = "Annum",
},
["short trillion year"] = {
name1 = "trillion years",
name2 = "trillion years",
symbol = "Ta",
utype = "time",
scale = 31557600000000000000,
default = "Es",
link = "Annum",
},
["thousand million year"] = {
name1 = "thousand million years",
name2 = "thousand million years",
symbol = "Ga",
utype = "time",
scale = 31557600000000000,
default = "Ps",
link = "Annum",
},
["wk"] = {
symbol = "week",
usename = 1,
utype = "time",
scale = 604800,
default = "Ms",
},
["year"] = {
name1 = "year",
symbol = "a",
utype = "time",
scale = 31557600,
default = "Ms",
link = "Annum",
},
["years"] = {
name1 = "year",
symbol = "yr",
utype = "time",
scale = 31557600,
default = "Ms",
link = "Annum",
},
["byr"] = {
target = "short billion year",
},
["day"] = {
target = "d",
},
["days"] = {
target = "d",
},
["dog yr"] = {
target = "dog year",
},
["Gyr"] = {
target = "thousand million year",
},
["hour"] = {
target = "h",
},
["hours"] = {
target = "h",
},
["kMyr"] = {
target = "thousand million year",
},
["kmyr"] = {
target = "thousand million year",
},
["kyr"] = {
target = "millennium",
},
["long byr"] = {
target = "long billion year",
},
["minute"] = {
target = "min",
},
["minutes"] = {
target = "min",
},
["mth"] = {
target = "month",
},
["Myr"] = {
target = "million year",
},
["myr"] = {
target = "million year",
},
["second"] = {
target = "s",
},
["seconds"] = {
target = "s",
},
["tmyr"] = {
target = "thousand million year",
},
["tryr"] = {
target = "short trillion year",
},
["tyr"] = {
target = "millennium",
},
["week"] = {
target = "wk",
},
["weeks"] = {
target = "wk",
},
["yr"] = {
target = "year",
},
["kg.m"] = {
name1 = "kilogram metre",
name1_us = "kilogram meter",
symbol = "kg⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbft",
link = "Kilogram metre (torque)",
},
["kgf.m"] = {
name1 = "kilogram force-metre",
name1_us = "kilogram force-meter",
symbol = "kgf⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["kgm"] = {
name1 = "kilogram metre",
name1_us = "kilogram meter",
symbol = "kg⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["kpm"] = {
name1 = "kilopond metre",
name1_us = "kilopond meter",
symbol = "kp⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbft",
link = "Kilogram metre (torque)",
},
["lb-fft"] = {
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "ft⋅lb<sub>f</sub>",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["lb.ft"] = {
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "lb⋅ft",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["lb.in"] = {
name1 = "pound force-inch",
symbol = "lb⋅in",
utype = "torque",
scale = 0.1129848290276167,
default = "mN.m",
link = "Pound-foot (torque)",
},
["lbfft"] = {
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "lbf⋅ft",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["lbft"] = {
name1 = "pound-foot",
name2 = "pound-feet",
symbol = "lb⋅ft",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["m.kg-f"] = {
name1 = "metre kilogram-force",
name1_us = "meter kilogram-force",
name2 = "metre kilograms-force",
name2_us = "meter kilograms-force",
symbol = "m⋅kg<sub>f</sub>",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["m.kgf"] = {
name1 = "metre kilogram-force",
name1_us = "meter kilogram-force",
name2 = "metre kilograms-force",
name2_us = "meter kilograms-force",
symbol = "m⋅kgf",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["mN.m"] = {
name1 = "millinewton-metre",
name1_us = "millinewton-meter",
symbol = "mN⋅m",
utype = "torque",
scale = 0.001,
default = "lb.in",
link = "Newton-metre",
},
["Nm"] = {
_name1 = "newton-metre",
_name1_us= "newton-meter",
_symbol = "N⋅m",
utype = "torque",
alttype = "energy",
scale = 1,
prefixes = 1,
default = "lbfft",
link = "Newton-metre",
},
["kN/m"] = {
per = { "kN", "-m-stiff" },
utype = "torque",
default = "lbf/in",
},
["lbf/in"] = {
per = { "lbf", "-in-stiff" },
utype = "torque",
default = "kN/m",
},
["lb-f.ft"] = {
target = "lb-fft",
},
["lbf.ft"] = {
target = "lbfft",
},
["lbf·ft"] = {
target = "lbfft",
},
["lb·ft"] = {
target = "lb.ft",
},
["mkg-f"] = {
target = "m.kg-f",
},
["mkgf"] = {
target = "m.kgf",
},
["N.m"] = {
target = "Nm",
},
["N·m"] = {
target = "Nm",
},
["ton-mile"] = {
symbol = "ton-mile",
usename = 1,
utype = "transportation",
scale = 1.4599723182105602,
default = "tkm",
},
["tkm"] = {
name1 = "tonne-kilometre",
name1_us = "tonne-kilometer",
symbol = "tkm",
utype = "transportation",
scale = 1,
default = "ton-mile",
},
["-12USoz(mL)serve"] = {
name1_us = "12 U.S. fl oz (355 mL) serving",
symbol = "12 US fl oz (355 mL) serving",
sym_us = "12 U.S. fl oz (355 mL) serving",
utype = "volume",
scale = 0.00035488235475000004,
default = "mL",
link = "Beverage can#Standard sizes",
},
["-12USoz(ml)serve"] = {
name1_us = "12 U.S. fl oz (355 ml) serving",
symbol = "12 US fl oz (355 ml) serving",
sym_us = "12 U.S. fl oz (355 ml) serving",
utype = "volume",
scale = 0.00035488235475000004,
default = "ml",
link = "Beverage can#Standard sizes",
},
["-12USozserve"] = {
name1_us = "12 U.S. fl oz serving",
symbol = "12 US fl oz serving",
sym_us = "12 U.S. fl oz serving",
utype = "volume",
scale = 0.00035488235475000004,
default = "mL",
link = "Beverage can#Standard sizes",
},
["acre-foot"] = {
name1 = "acre-foot",
name2 = "acre-foot",
symbol = "acre⋅ft",
utype = "volume",
scale = 1233.48183754752,
default = "m3",
},
["acre-ft"] = {
name1 = "acre-foot",
name2 = "acre-feet",
symbol = "acre⋅ft",
utype = "volume",
scale = 1233.48183754752,
default = "m3",
},
["AUtbsp"] = {
name1 = "Australian tablespoon",
symbol = "AU tbsp",
utype = "volume",
scale = 0.000020,
default = "ml",
},
["Bcuft"] = {
name1 = "billion cubic foot",
name2 = "billion cubic feet",
symbol = "billion cu ft",
utype = "volume",
scale = 28316846.592,
default = "Gl",
link = "Cubic foot",
},
["bdft"] = {
name1 = "board foot",
name2 = "board feet",
symbol = "bd ft",
utype = "volume",
scale = 0.0023597372167,
default = "m3",
},
["board feet"] = {
name2 = "board feet",
symbol = "board foot",
usename = 1,
utype = "volume",
scale = 0.0023597372167,
default = "m3",
},
["board foot"] = {
name2 = "board foot",
symbol = "board foot",
usename = 1,
utype = "volume",
scale = 0.0023597372167,
default = "m3",
},
["cc"] = {
name1 = "cubic centimetre",
name1_us = "cubic centimeter",
symbol = "cc",
utype = "volume",
scale = 0.000001,
default = "cuin",
},
["CID"] = {
name1 = "cubic inch",
name2 = "cubic inches",
symbol = "cu in",
utype = "volume",
scale = 0.000016387064,
default = "cc",
link = "Cubic inch#Engine displacement",
},
["cord"] = {
symbol = "cord",
utype = "volume",
scale = 3.624556363776,
default = "m3",
link = "Cord (unit)",
},
["cufoot"] = {
name1 = "cubic foot",
name2 = "cubic foot",
symbol = "cu ft",
utype = "volume",
scale = 0.028316846592,
default = "m3",
},
["cuft"] = {
name1 = "cubic foot",
name2 = "cubic feet",
symbol = "cu ft",
utype = "volume",
scale = 0.028316846592,
default = "m3",
},
["cuin"] = {
name1 = "cubic inch",
name2 = "cubic inches",
symbol = "cu in",
utype = "volume",
scale = 0.000016387064,
default = "cm3",
},
["cumi"] = {
name1 = "cubic mile",
symbol = "cu mi",
utype = "volume",
scale = 4168181825.440579584,
default = "km3",
},
["cuyd"] = {
name1 = "cubic yard",
symbol = "cu yd",
utype = "volume",
scale = 0.764554857984,
default = "m3",
},
["firkin"] = {
symbol = "firkin",
usename = 1,
utype = "volume",
scale = 0.04091481,
default = "l impgal USgal",
link = "Firkin (unit)",
},
["foot3"] = {
target = "cufoot",
},
["Goilbbl"] = {
name1 = "billion barrels",
name2 = "billion barrels",
symbol = "Gbbl",
utype = "volume",
scale = 158987294.928,
default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["gr water"] = {
name1 = "grains water",
name2 = "grains water",
symbol = "gr H<sub>2</sub>O",
utype = "volume",
scale = 0.00000006479891,
default = "cm3",
link = "Grain (unit)",
},
["grt"] = {
name1 = "gross register ton",
symbol = "grt",
utype = "volume",
scale = 2.8316846592,
default = "m3",
link = "Gross register tonnage",
},
["impbbl"] = {
name1 = "imperial barrel",
symbol = "imp bbl",
utype = "volume",
scale = 0.16365924,
default = "l impgal USgal",
link = "Barrel (unit)",
},
["impbsh"] = {
name1 = "imperial bushel",
symbol = "imp bsh",
utype = "volume",
scale = 0.03636872,
default = "l impgal USdrygal",
},
["impbu"] = {
name1 = "imperial bushel",
symbol = "imp bu",
utype = "volume",
scale = 0.03636872,
default = "m3",
},
["impgal"] = {
name1 = "imperial gallon",
symbol = "imp gal",
utype = "volume",
scale = 0.00454609,
default = "l USgal",
},
["impgi"] = {
name1 = "gill",
symbol = "gi",
utype = "volume",
scale = 0.0001420653125,
default = "ml USoz",
link = "Gill (unit)",
},
["impkenning"] = {
name1 = "imperial kenning",
symbol = "kenning",
utype = "volume",
scale = 0.01818436,
default = "l USdrygal",
link = "Kenning (unit)",
},
["impoz"] = {
name1 = "imperial fluid ounce",
symbol = "imp fl oz",
utype = "volume",
scale = 0.0000284130625,
default = "ml USoz",
},
["imppk"] = {
name1 = "imperial peck",
symbol = "pk",
utype = "volume",
scale = 0.00909218,
default = "l USdrygal",
link = "Peck",
},
["imppt"] = {
name1 = "imperial pint",
symbol = "imp pt",
utype = "volume",
scale = 0.00056826125,
default = "l",
},
["impqt"] = {
name1 = "imperial quart",
symbol = "imp qt",
utype = "volume",
scale = 0.0011365225,
default = "ml USoz",
customary= 3,
},
["kilderkin"] = {
symbol = "kilderkin",
usename = 1,
utype = "volume",
scale = 0.08182962,
default = "l impgal USgal",
},
["koilbbl"] = {
name1 = "thousand barrels",
name2 = "thousand barrels",
symbol = "kbbl",
utype = "volume",
scale = 158.987294928,
default = "v * 1.58987294928 < 10 ! ! e3 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["L"] = {
_name1 = "litre",
_name1_us= "liter",
_symbol = "L",
utype = "volume",
scale = 0.001,
prefixes = 1,
default = "impgal USgal",
link = "Litre",
},
["l"] = {
_name1 = "litre",
_name1_us= "liter",
_symbol = "l",
utype = "volume",
scale = 0.001,
prefixes = 1,
default = "impgal USgal",
link = "Litre",
},
["m3"] = {
_name1 = "cubic metre",
_name1_us= "cubic meter",
_symbol = "m<sup>3</sup>",
prefix_position= 7,
utype = "volume",
scale = 1,
prefixes = 3,
default = "cuft",
link = "Cubic metre",
},
["Mbbl"] = {
name1 = "thousand barrels",
name2 = "thousand barrels",
symbol = "Mbbl",
utype = "volume",
scale = 158.987294928,
default = "v * 1.58987294928 < 10 ! e3 ! ! m3",
link = "Barrel (unit)#Oil barrel",
},
["MMoilbbl"] = {
name1 = "million barrels",
name2 = "million barrels",
symbol = "MMbbl",
utype = "volume",
scale = 158987.294928,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["Moilbbl"] = {
name1 = "million barrels",
name2 = "million barrels",
symbol = "Mbbl",
utype = "volume",
scale = 158987.294928,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["MTON"] = {
name1 = "measurement ton",
symbol = "MTON",
utype = "volume",
scale = 1.13267386368,
default = "m3",
},
["MUSgal"] = {
name1 = "million US gallons",
name1_us = "million U.S. gallons",
name2 = "million US gallons",
name2_us = "million U.S. gallons",
symbol = "million US gal",
sym_us = "million U.S. gal",
utype = "volume",
scale = 3785.411784,
default = "Ml",
link = "US gallon",
},
["oilbbl"] = {
name1 = "barrel",
symbol = "bbl",
utype = "volume",
scale = 0.158987294928,
default = "m3",
link = "Barrel (unit)#Oil barrel",
},
["stere"] = {
symbol = "stere",
usename = 1,
utype = "volume",
scale = 1,
default = "cuft",
},
["Toilbbl"] = {
name1 = "trillion barrels",
name2 = "trillion barrels",
symbol = "Tbbl",
utype = "volume",
scale = 158987294928,
default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["USbbl"] = {
name1 = "US barrel",
name1_us = "U.S. barrel",
symbol = "US bbl",
sym_us = "U.S. bbl",
utype = "volume",
scale = 0.119240471196,
default = "l USgal impgal",
link = "Barrel (unit)",
},
["USbeerbbl"] = {
name1 = "US beer barrel",
name1_us = "U.S. beer barrel",
symbol = "US bbl",
sym_us = "U.S. bbl",
utype = "volume",
scale = 0.117347765304,
default = "l USgal impgal",
link = "Barrel (unit)",
},
["USbsh"] = {
name1 = "US bushel",
name1_us = "U.S. bushel",
symbol = "US bsh",
sym_us = "U.S. bsh",
utype = "volume",
scale = 0.03523907016688,
default = "l USdrygal impgal",
link = "Bushel",
},
["USbu"] = {
name1 = "US bushel",
name1_us = "U.S. bushel",
symbol = "US bu",
sym_us = "U.S. bu",
utype = "volume",
scale = 0.03523907016688,
default = "l USdrygal impgal",
link = "Bushel",
},
["USdrybbl"] = {
name1 = "US dry barrel",
name1_us = "U.S. dry barrel",
symbol = "US dry bbl",
sym_us = "U.S. dry bbl",
utype = "volume",
scale = 0.11562819898508,
default = "m3",
link = "Barrel (unit)",
},
["USdrygal"] = {
name1 = "US dry gallon",
name1_us = "U.S. dry gallon",
symbol = "US dry gal",
sym_us = "U.S. dry gal",
utype = "volume",
scale = 0.00440488377086,
default = "l",
link = "Gallon",
},
["USdrypt"] = {
name1 = "US dry pint",
name1_us = "U.S. dry pint",
symbol = "US dry pt",
sym_us = "U.S. dry pt",
utype = "volume",
scale = 0.0005506104713575,
default = "ml",
link = "Pint",
},
["USdryqt"] = {
name1 = "US dry quart",
name1_us = "U.S. dry quart",
symbol = "US dry qt",
sym_us = "U.S. dry qt",
utype = "volume",
scale = 0.001101220942715,
default = "ml",
link = "Quart",
},
["USflgal"] = {
name1 = "US gallon",
name1_us = "U.S. gallon",
symbol = "US fl gal",
sym_us = "U.S. fl gal",
utype = "volume",
scale = 0.003785411784,
default = "l impgal",
link = "Gallon",
},
["USgal"] = {
name1 = "US gallon",
name1_us = "U.S. gallon",
symbol = "US gal",
sym_us = "U.S. gal",
utype = "volume",
scale = 0.003785411784,
default = "l impgal",
},
["USgi"] = {
name1 = "gill",
symbol = "gi",
utype = "volume",
scale = 0.0001182941183,
default = "ml impoz",
link = "Gill (unit)",
},
["USkenning"] = {
name1 = "US kenning",
name1_us = "U.S. kenning",
symbol = "US kenning",
sym_us = "U.S. kenning",
utype = "volume",
scale = 0.01761953508344,
default = "l impgal",
link = "Kenning (unit)",
},
["USmin"] = {
name1 = "US minim",
name1_us = "U.S. minim",
symbol = "US min",
sym_us = "U.S. min",
utype = "volume",
scale = 0.000000061611519921875,
default = "ml",
link = "Minim (unit)",
},
["USoz"] = {
name1 = "US fluid ounce",
name1_us = "U.S. fluid ounce",
symbol = "US fl oz",
sym_us = "U.S. fl oz",
utype = "volume",
scale = 0.0000295735295625,
default = "ml",
},
["USpk"] = {
name1 = "US peck",
name1_us = "U.S. peck",
symbol = "US pk",
sym_us = "U.S. pk",
utype = "volume",
scale = 0.00880976754172,
default = "l impgal",
link = "Peck",
},
["USpt"] = {
name1 = "US pint",
name1_us = "U.S. pint",
symbol = "US pt",
sym_us = "U.S. pt",
utype = "volume",
scale = 0.000473176473,
default = "l imppt",
link = "Pint",
},
["USqt"] = {
name1 = "US quart",
name1_us = "U.S. quart",
symbol = "US qt",
sym_us = "U.S. qt",
utype = "volume",
scale = 0.000946352946,
default = "ml",
link = "Quart",
customary= 1,
},
["USquart"] = {
name1 = "US quart",
name1_us = "U.S. quart",
symbol = "US qt",
sym_us = "U.S. qt",
utype = "volume",
scale = 0.000946352946,
default = "ml impoz",
link = "Quart",
},
["UStbsp"] = {
name1 = "US tablespoon",
name1_us = "U.S. tablespoon",
symbol = "US tbsp",
sym_us = "U.S. tbsp",
utype = "volume",
scale = 1.4786764781250001e-5,
default = "ml",
},
["winecase"] = {
symbol = "case",
usename = 1,
utype = "volume",
scale = 0.009,
default = "l",
link = "Case (goods)",
},
["*U.S.drygal"] = {
target = "USdrygal",
sp_us = true,
customary= 2,
},
["*U.S.gal"] = {
target = "USgal",
sp_us = true,
default = "L impgal",
customary= 2,
},
["+USdrygal"] = {
target = "USdrygal",
customary= 1,
},
["+usfloz"] = {
target = "USoz",
link = "Fluid ounce",
customary= 1,
},
["+USgal"] = {
target = "USgal",
customary= 1,
},
["+USoz"] = {
target = "USoz",
customary= 1,
},
["@impgal"] = {
target = "impgal",
link = "Gallon",
customary= 3,
},
["acre feet"] = {
target = "acre-ft",
},
["acre foot"] = {
target = "acre-foot",
},
["acre ft"] = {
target = "acre-ft",
},
["acre-feet"] = {
target = "acre-ft",
},
["acre.foot"] = {
target = "acre-foot",
},
["acre.ft"] = {
target = "acre-ft",
},
["acre·ft"] = {
target = "acre-ft",
},
["bushels"] = {
target = "USbsh",
},
["cid"] = {
target = "CID",
},
["ft3"] = {
target = "cuft",
},
["gal"] = {
target = "USgal",
},
["gallon"] = {
shouldbe = "Use %{USgal%} for US gallons or %{impgal%} for imperial gallons (not %{gallon%})",
},
["gallons"] = {
shouldbe = "Use %{USgal%} for US gallons or %{impgal%} for imperial gallons (not %{gallons%})",
},
["Gcuft"] = {
target = "e9cuft",
},
["impfloz"] = {
target = "impoz",
},
["Impgal"] = {
target = "impgal",
},
["in3"] = {
target = "cuin",
symbol = "in<sup>3</sup>",
},
["kcuft"] = {
target = "e3cuft",
},
["kcum"] = {
target = "e3m3",
},
["km³"] = {
target = "km3",
},
["liter"] = {
target = "L",
sp_us = true,
},
["liters"] = {
target = "L",
sp_us = true,
},
["litre"] = {
target = "L",
},
["litres"] = {
target = "L",
},
["Mcuft"] = {
target = "e6cuft",
},
["Mcum"] = {
target = "e6m3",
},
["Mft3"] = {
target = "e6cuft",
},
["mi3"] = {
target = "cumi",
},
["m³"] = {
target = "m3",
},
["Pcuft"] = {
target = "e15cuft",
},
["pt"] = {
shouldbe = "Use %{USpt%} for US pints or %{imppt%} for imperial pints (not %{pt%})",
},
["qt"] = {
shouldbe = "Use %{USqt%} for US quarts or %{impqt%} for imperial quarts (not %{qt%})",
},
["Tcuft"] = {
target = "e12cuft",
},
["Tft3"] = {
target = "e12cuft",
},
["U.S.bbl"] = {
target = "USbbl",
sp_us = true,
default = "l U.S.gal impgal",
},
["U.S.beerbbl"] = {
target = "USbeerbbl",
sp_us = true,
default = "l U.S.gal impgal",
},
["U.S.bsh"] = {
target = "USbsh",
sp_us = true,
default = "l U.S.drygal impgal",
},
["U.S.bu"] = {
target = "USbu",
sp_us = true,
default = "l U.S.drygal impgal",
},
["U.S.drybbl"] = {
target = "USdrybbl",
sp_us = true,
},
["U.S.drygal"] = {
target = "USdrygal",
sp_us = true,
},
["U.S.drypt"] = {
target = "USdrypt",
sp_us = true,
},
["U.S.dryqt"] = {
target = "USdryqt",
sp_us = true,
},
["U.S.flgal"] = {
target = "USflgal",
sp_us = true,
},
["U.S.floz"] = {
target = "USoz",
sp_us = true,
},
["U.S.gal"] = {
target = "USgal",
sp_us = true,
default = "L impgal",
link = "U.S. gallon",
},
["u.s.gal"] = {
target = "USgal",
sp_us = true,
default = "L impgal",
link = "U.S. gallon",
},
["U.S.gi"] = {
target = "USgi",
sp_us = true,
},
["U.S.kenning"] = {
target = "USkenning",
sp_us = true,
},
["U.S.oz"] = {
target = "USoz",
sp_us = true,
},
["U.S.pk"] = {
target = "USpk",
sp_us = true,
},
["U.S.pt"] = {
target = "USpt",
sp_us = true,
},
["U.S.qt"] = {
target = "USqt",
sp_us = true,
default = "L impqt",
customary= 2,
},
["usbbl"] = {
target = "USbbl",
},
["usbeerbbl"] = {
target = "USbeerbbl",
},
["usbsh"] = {
target = "USbsh",
},
["usbu"] = {
target = "USbu",
},
["usdrybbl"] = {
target = "USdrybbl",
},
["usdrygal"] = {
target = "USdrygal",
},
["usdrypt"] = {
target = "USdrypt",
},
["usdryqt"] = {
target = "USdryqt",
},
["USfloz"] = {
target = "USoz",
},
["usfloz"] = {
target = "USoz",
},
["USGAL"] = {
target = "USgal",
},
["usgal"] = {
target = "USgal",
},
["usgi"] = {
target = "USgi",
},
["uskenning"] = {
target = "USkenning",
},
["usoz"] = {
target = "USoz",
},
["uspk"] = {
target = "USpk",
},
["uspt"] = {
target = "USpt",
},
["usqt"] = {
target = "USqt",
},
["yd3"] = {
target = "cuyd",
},
["cuft/sqmi"] = {
per = { "cuft", "sqmi" },
utype = "volume per unit area",
default = "m3/km2",
},
["m3/ha"] = {
name1 = "cubic metre per hectare",
name1_us = "cubic meter per hectare",
name2 = "cubic metres per hectare",
name2_us = "cubic meters per hectare",
symbol = "m<sup>3</sup>/ha",
utype = "volume per unit area",
scale = 0.0001,
default = "USbu/acre",
link = "Hectare",
},
["m3/km2"] = {
per = { "m3", "km2" },
utype = "volume per unit area",
default = "cuft/sqmi",
},
["U.S.gal/acre"] = {
per = { "U.S.gal", "acre" },
utype = "volume per unit area",
default = "m3/km2",
},
["USbu/acre"] = {
name2 = "US bushels per acre",
symbol = "US bushel per acre",
usename = 1,
utype = "volume per unit area",
scale = 8.7077638761350888e-6,
default = "m3/ha",
link = "Bushel",
},
["USgal/acre"] = {
per = { "USgal", "acre" },
utype = "volume per unit area",
default = "m3/km2",
},
["cuyd/mi"] = {
per = { "cuyd", "mi" },
utype = "volume per unit length",
default = "m3/km",
},
["m3/km"] = {
per = { "m3", "km" },
utype = "volume per unit length",
default = "cuyd/mi",
},
["mich"] = {
combination= { "ch", "mi" },
multiple = { 80 },
utype = "length",
},
["michlk"] = {
combination= { "chlk", "mi" },
multiple = { 80 },
utype = "length",
},
["michainlk"] = {
combination= { "chainlk", "mi" },
multiple = { 80 },
utype = "length",
},
["miyd"] = {
combination= { "yd", "mi" },
multiple = { 1760 },
utype = "length",
},
["miydftin"] = {
combination= { "in", "ft", "yd", "mi" },
multiple = { 12, 3, 1760 },
utype = "length",
},
["mift"] = {
combination= { "ft", "mi" },
multiple = { 5280 },
utype = "length",
},
["ydftin"] = {
combination= { "in", "ft", "yd" },
multiple = { 12, 3 },
utype = "length",
},
["ydft"] = {
combination= { "ft", "yd" },
multiple = { 3 },
utype = "length",
},
["ftin"] = {
combination= { "in", "ft" },
multiple = { 12 },
utype = "length",
},
["footin"] = {
combination= { "in", "foot" },
multiple = { 12 },
utype = "length",
},
["handin"] = {
combination= { "in", "hand" },
multiple = { 4 },
utype = "length",
},
["lboz"] = {
combination= { "oz", "lb" },
multiple = { 16 },
utype = "mass",
},
["stlb"] = {
combination= { "lb", "st" },
multiple = { 14 },
utype = "mass",
},
["stlboz"] = {
combination= { "oz", "lb", "st" },
multiple = { 16, 14 },
utype = "mass",
},
["st and lb"] = {
combination= { "lb", "st" },
multiple = { 14 },
utype = "mass",
},
["GN LTf"] = {
combination= { "GN", "-LTf" },
utype = "force",
},
["GN LTf STf"] = {
combination= { "GN", "-LTf", "-STf" },
utype = "force",
},
["GN STf"] = {
combination= { "GN", "-STf" },
utype = "force",
},
["GN STf LTf"] = {
combination= { "GN", "-STf", "-LTf" },
utype = "force",
},
["kN LTf"] = {
combination= { "kN", "-LTf" },
utype = "force",
},
["kN LTf STf"] = {
combination= { "kN", "-LTf", "-STf" },
utype = "force",
},
["kN STf"] = {
combination= { "kN", "-STf" },
utype = "force",
},
["kN STf LTf"] = {
combination= { "kN", "-STf", "-LTf" },
utype = "force",
},
["LTf STf"] = {
combination= { "-LTf", "-STf" },
utype = "force",
},
["MN LTf"] = {
combination= { "MN", "-LTf" },
utype = "force",
},
["MN LTf STf"] = {
combination= { "MN", "-LTf", "-STf" },
utype = "force",
},
["MN STf"] = {
combination= { "MN", "-STf" },
utype = "force",
},
["MN STf LTf"] = {
combination= { "MN", "-STf", "-LTf" },
utype = "force",
},
["STf LTf"] = {
combination= { "-STf", "-LTf" },
utype = "force",
},
["L/100 km mpgimp"] = {
combination= { "L/100 km", "mpgimp" },
utype = "fuel efficiency",
},
["l/100 km mpgimp"] = {
combination= { "l/100 km", "mpgimp" },
utype = "fuel efficiency",
},
["L/100 km mpgUS"] = {
combination= { "L/100 km", "mpgus" },
utype = "fuel efficiency",
},
["L/100 km mpgus"] = {
combination= { "L/100 km", "mpgus" },
utype = "fuel efficiency",
},
["l/100 km mpgus"] = {
combination= { "l/100 km", "mpgus" },
utype = "fuel efficiency",
},
["mpgimp L/100 km"] = {
combination= { "mpgimp", "L/100 km" },
utype = "fuel efficiency",
},
["LT ST t"] = {
combination= { "lt", "-ST", "t" },
utype = "mass",
},
["LT t ST"] = {
combination= { "lt", "t", "-ST" },
utype = "mass",
},
["ST LT t"] = {
combination= { "-ST", "lt", "t" },
utype = "mass",
},
["ST t LT"] = {
combination= { "-ST", "t", "lt" },
utype = "mass",
},
["t LT ST"] = {
combination= { "t", "lt", "-ST" },
utype = "mass",
},
["ton"] = {
combination= { "LT", "ST" },
utype = "mass",
},
["kPa kg/cm2"] = {
combination= { "kPa", "kgf/cm2" },
utype = "pressure",
},
["kPa lb/in2"] = {
combination= { "kPa", "-lb/in2" },
utype = "pressure",
},
["floz"] = {
combination= { "impoz", "USoz" },
utype = "volume",
},
}
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local default_exceptions = {
-- Prefixed units with a default different from that of the base unit.
-- Each key item is a prefixed symbol (unitcode for engineering notation).
["cm<sup>2</sup>"] = "sqin",
["dm<sup>2</sup>"] = "sqin",
["e3acre"] = "km2",
["e3m2"] = "e6sqft",
["e6acre"] = "km2",
["e6ha"] = "e6acre",
["e6km2"] = "e6sqmi",
["e6m2"] = "e6sqft",
["e6sqft"] = "v * 9.290304 < 100 ! e3 ! e6 ! m2",
["e6sqmi"] = "e6km2",
["hm<sup>2</sup>"] = "acre",
["km<sup>2</sup>"] = "sqmi",
["mm<sup>2</sup>"] = "sqin",
["aJ"] = "eV",
["e3BTU"] = "MJ",
["e6BTU"] = "GJ",
["EJ"] = "kWh",
["fJ"] = "keV",
["GJ"] = "kWh",
["MJ"] = "kWh",
["PJ"] = "kWh",
["pJ"] = "MeV",
["TJ"] = "kWh",
["YJ"] = "kWh",
["yJ"] = "μeV",
["ZJ"] = "kWh",
["zJ"] = "meV",
["e12cuft/a"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/a",
["e12cuft/d"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/d",
["e12m3/a"] = "Tcuft/a",
["e12m3/d"] = "Tcuft/d",
["e3cuft/a"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/a",
["e3cuft/d"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/d",
["e3cuft/s"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/s",
["e3m3/a"] = "v < 28.316846592 ! k ! M ! cuft/a",
["e3m3/d"] = "v < 28.316846592 ! k ! M ! cuft/d",
["e3m3/s"] = "v < 28.316846592 ! k ! M ! cuft/s",
["e3USgal/a"] = "v * 3.785411784 < 1000 ! ! e3 ! m3/a",
["e6cuft/a"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/a",
["e6cuft/d"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/d",
["e6cuft/s"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/s",
["e6m3/a"] = "v < 28.316846592 ! M ! G ! cuft/a",
["e6m3/d"] = "v < 28.316846592 ! M ! G ! cuft/d",
["e6m3/s"] = "v < 28.316846592 ! e6 ! e9 ! cuft/s",
["e6USgal/a"] = "v * 3.785411784 < 1000 ! e3 ! e6 ! m3/a",
["e9cuft/a"] = "m3/a",
["e9cuft/d"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3/d",
["e9m3/a"] = "v < 28.316846592 ! G ! T ! cuft/a",
["e9m3/d"] = "v < 28.316846592 ! G ! T ! cuft/d",
["e9m3/s"] = "v < 28.316846592 ! e9 ! e12 ! cuft/s",
["e9USgal/a"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/a",
["e9USgal/s"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/s",
["nN"] = "gr-f",
["μN"] = "gr-f",
["mN"] = "oz-f",
["am"] = "in",
["cm"] = "in",
["dam"] = "ft",
["dm"] = "in",
["e12km"] = "e12mi",
["e12mi"] = "e12km",
["e3AU"] = "ly",
["e3km"] = "e3mi",
["e3mi"] = "e3km",
["e6km"] = "e6mi",
["e6mi"] = "e6km",
["e9km"] = "AU",
["e9mi"] = "e9km",
["Em"] = "mi",
["fm"] = "in",
["Gm"] = "mi",
["hm"] = "ft",
["km"] = "mi",
["mm"] = "in",
["Mm"] = "mi",
["nm"] = "in",
["Pm"] = "mi",
["pm"] = "in",
["Tm"] = "mi",
["Ym"] = "mi",
["ym"] = "in",
["Zm"] = "mi",
["zm"] = "in",
["μm"] = "in",
["e12lb"] = "v * 4.5359237 < 10 ! Mt ! Gt",
["e3lb"] = "v * 4.5359237 < 10 ! kg ! t",
["e3ozt"] = "v * 0.311034768 < 10 ! kg ! t",
["e3t"] = "LT ST",
["e6carat"] = "t",
["e6lb"] = "v * 4.5359237 < 10 ! t ! kilotonne",
["e6ozt"] = "lb kg",
["e6ST"] = "Mt",
["e6t"] = "LT ST",
["e9lb"] = "v * 4.5359237 < 10 ! kilotonne ! Mt",
["e9t"] = "LT ST",
["Gg"] = "lb",
["kg"] = "lb",
["mg"] = "gr",
["Mg"] = "LT ST",
["ng"] = "gr",
["μg"] = "gr",
["mBq"] = "fCi",
["kBq"] = "nCi",
["MBq"] = "μCi",
["GBq"] = "mCi",
["TBq"] = "Ci",
["PBq"] = "kCi",
["EBq"] = "kCi",
["fCi"] = "mBq",
["pCi"] = "Bq",
["nCi"] = "Bq",
["μCi"] = "kBq",
["mCi"] = "MBq",
["kCi"] = "TBq",
["MCi"] = "PBq",
["ns"] = "μs",
["μs"] = "ms",
["ms"] = "s",
["ks"] = "h",
["Ms"] = "week",
["Gs"] = "decade",
["Ts"] = "millennium",
["Ps"] = "million year",
["Es"] = "thousand million year",
["MK"] = "keVT",
["cL"] = "impoz usoz",
["cl"] = "impoz usoz",
["cm<sup>3</sup>"] = "cuin",
["dL"] = "impoz usoz",
["dl"] = "impoz usoz",
["mm<sup>3</sup>"] = "cuin",
["dm<sup>3</sup>"] = "cuin",
["e12cuft"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3",
["e12impgal"] = "v * 4.54609 < 1000 ! T ! P ! l",
["e12m3"] = "v < 28.316846592 ! T ! P ! cuft",
["e12U.S.gal"] = "v * 3.785411784 < 1000 ! T ! P ! l",
["e12USgal"] = "v * 3.785411784 < 1000 ! T ! P ! l",
["e15cuft"] = "v * 2.8316846592 < 100 ! e12 ! e15 ! m3",
["e15m3"] = "Pcuft",
["e3bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3",
["e3cuft"] = "v * 2.8316846592 < 100 ! ! e3 ! m3",
["e3impgal"] = "v * 4.54609 < 1000 ! k ! M ! l",
["e3m3"] = "v < 28.316846592 ! k ! M ! cuft",
["e3U.S.gal"] = "v * 3.785411784 < 1000 ! k ! M ! l",
["e3USgal"] = "v * 3.785411784 < 1000 ! k ! M ! l",
["e6bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3",
["e6cuft"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3",
["e6cuyd"] = "v * 7.64554857984 < 10 ! e3 ! e6 ! m3",
["e6impgal"] = "v * 4.54609 < 1000 ! M ! G ! l",
["e6L"] = "USgal",
["e6m3"] = "v < 28.316846592 ! M ! G ! cuft",
["e6U.S.gal"] = "v * 3.785411784 < 1000 ! M ! G ! l",
["e6USgal"] = "v * 3.785411784 < 1000 ! M ! G ! l",
["e9bdft"] = "v * 0.23597372167 < 100 ! e6 ! e9 ! m3",
["e9cuft"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3",
["e9impgal"] = "v * 4.54609 < 1000 ! G ! T ! l",
["e9m3"] = "v < 28.316846592 ! G ! T ! cuft",
["e9U.S.gal"] = "v * 3.785411784 < 1000 ! G ! T ! l",
["e9USgal"] = "v * 3.785411784 < 1000 ! G ! T ! l",
["GL"] = "cuft",
["Gl"] = "cuft",
["kL"] = "cuft",
["kl"] = "cuft",
["km<sup>3</sup>"] = "cumi",
["mL"] = "impoz usoz",
["ml"] = "impoz usoz",
["Ml"] = "v < 28.316846592 ! e3 ! e6 ! cuft",
["ML"] = "v < 28.316846592 ! e3 ! e6 ! cuft",
["TL"] = "cumi",
["Tl"] = "cumi",
["μL"] = "cuin",
["μl"] = "cuin",
}
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local link_exceptions = {
-- Prefixed units with a linked article different from that of the base unit.
-- Each key item is a prefixed symbol (not unitcode).
["mm<sup>2</sup>"] = "Square millimetre",
["cm<sup>2</sup>"] = "Square centimetre",
["dm<sup>2</sup>"] = "Square decimetre",
["km<sup>2</sup>"] = "Square kilometre",
["kJ"] = "Kilojoule",
["MJ"] = "Megajoule",
["GJ"] = "Gigajoule",
["TJ"] = "Terajoule",
["fm"] = "Femtometre",
["pm"] = "Picometre",
["nm"] = "Nanometre",
["μm"] = "Micrometre",
["mm"] = "Millimetre",
["cm"] = "Centimetre",
["dm"] = "Decimetre",
["dam"] = "Decametre",
["hm"] = "Hectometre",
["km"] = "Kilometre",
["Mm"] = "Megametre",
["Gm"] = "Gigametre",
["Tm"] = "Terametre",
["Pm"] = "Petametre",
["Em"] = "Exametre",
["Zm"] = "Zettametre",
["Ym"] = "Yottametre",
["μg"] = "Microgram",
["mg"] = "Milligram",
["kg"] = "Kilogram",
["Mg"] = "Tonne",
["yW"] = "Yoctowatt",
["zW"] = "Zeptowatt",
["aW"] = "Attowatt",
["fW"] = "Femtowatt",
["pW"] = "Picowatt",
["nW"] = "Nanowatt",
["μW"] = "Microwatt",
["mW"] = "Milliwatt",
["kW"] = "Kilowatt",
["MW"] = "Megawatt",
["GW"] = "Gigawatt",
["TW"] = "Terawatt",
["PW"] = "Petawatt",
["EW"] = "Exawatt",
["ZW"] = "Zettawatt",
["YW"] = "Yottawatt",
["as"] = "Attosecond",
["fs"] = "Femtosecond",
["ps"] = "Picosecond",
["ns"] = "Nanosecond",
["μs"] = "Microsecond",
["ms"] = "Millisecond",
["ks"] = "Kilosecond",
["Ms"] = "Megasecond",
["Gs"] = "Gigasecond",
["Ts"] = "Terasecond",
["Ps"] = "Petasecond",
["Es"] = "Exasecond",
["Zs"] = "Zettasecond",
["Ys"] = "Yottasecond",
["mm<sup>3</sup>"] = "Cubic millimetre",
["cm<sup>3</sup>"] = "Cubic centimetre",
["dm<sup>3</sup>"] = "Cubic decimetre",
["dam<sup>3</sup>"] = "Cubic decametre",
["km<sup>3</sup>"] = "Cubic kilometre",
["μL"] = "Microlitre",
["μl"] = "Microlitre",
["mL"] = "Millilitre",
["ml"] = "Millilitre",
["cL"] = "Centilitre",
["cl"] = "Centilitre",
["dL"] = "Decilitre",
["dl"] = "Decilitre",
["daL"] = "Decalitre",
["dal"] = "Decalitre",
["hL"] = "Hectolitre",
["hl"] = "Hectolitre",
["kL"] = "Kilolitre",
["kl"] = "Kilolitre",
["ML"] = "Megalitre",
["Ml"] = "Megalitre",
["GL"] = "Gigalitre",
["Gl"] = "Gigalitre",
["TL"] = "Teralitre",
["Tl"] = "Teralitre",
["PL"] = "Petalitre",
["Pl"] = "Petalitre",
}
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local per_unit_fixups = {
-- Automatically created per units of form "x/y" may have their unit type
-- changed, for example, "length/time" is changed to "speed".
-- Other adjustments can also be specified.
["/area"] = "per unit area",
["/volume"] = "per unit volume",
["area/area"] = "area per unit area",
["energy/length"] = "energy per unit length",
["energy/mass"] = "energy per unit mass",
["energy/time"] = { utype = "power", link = "Power (physics)" },
["energy/volume"] = "energy per unit volume",
["force/area"] = { utype = "pressure", link = "Pressure" },
["length/length"] = { utype = "gradient", link = "Grade (slope)" },
["length/time"] = { utype = "speed", link = "Speed" },
["length/time/time"] = { utype = "acceleration", link = "Acceleration" },
["mass/area"] = { utype = "pressure", multiplier = 9.80665 },
["mass/length"] = "linear density",
["mass/mass"] = "concentration",
["mass/power"] = "mass per unit power",
["mass/time"] = "mass per unit time",
["mass/volume"] = { utype = "density", link = "Density" },
["power/mass"] = "power per unit mass",
["power/volume"] = { link = "Power density" },
["pressure/length"] = "fracture gradient",
["speed/time"] = { utype = "acceleration", link = "Acceleration" },
["volume/area"] = "volume per unit area",
["volume/length"] = "volume per unit length",
["volume/time"] = "flow",
}
return {
all_units = all_units,
default_exceptions = default_exceptions,
link_exceptions = link_exceptions,
per_unit_fixups = per_unit_fixups,
}